FS: 2005 350Z ST3 Racecar
#1
2005 350Z ST3 Racecar
Hi all,
I am floating the idea of moving on to other classes, so I have my Zed up for sale. Here are the details:
Never wrecked, it is currently setup for NASA ST3. Original owner since taking delivery in July 2005. Maintained and built by Japtrix/Pros Tuning in West Palm Beach, FL. Additional photos or info available by calling 954-732-6426 or emailing me at obzezzed350@gmail.com. Price is 35k.
Overview:
- 5 Hours on built engine, 314whp, 284tq on E85
- 5 Hours on new OEM 6 speed transmission
- 3218 lbs with 190lb driver, and 3/4 tank of fuel
- Turn key w/ Traqmate, Cool Shirt included.
- 2 sets of Enkei RPF1s (18x9.5)
- NASA/SCCA Logbooks
Engine:
- 13:1 Compression w/ CP Pistons, Carillo Rods
- JWT S7 Cams, Ferrera Valves
- 3 angle valve job
- 7500RPM redline
- Haltech ECU paired with Uprev Flash
- Motodyne Plenum Spacer
- NWP 75mm throttle body
- Custom intake/exhaust
- Crawford Headers
- Spare block and 6 speed included
- Oil cooler
- Koyo Radiator
- Fuel transfer pump in tank to allow car to run under 1 gallon.
Drivetrain:
- OS Giken single disk clutch
- OS Giken LSD
- SPL differential bushings
- Differential cooler
Suspension/Brakes:
- Custom valved JIC FLT Dampers
- 20kg F/ 12kg R spring rates
- Stoptech ST40 Front BBK
- OEM Brembo Rear Brakes
- SPL upper a-arms
- SPL compression bushings
- SPL rear camber links
- SPL rear midlinks
- SPL lockout kit
- SPL bumpsteer kit
Chassis/Body
- Fulcrum Aeroworks front splitter w/ belly tray
- Fulcrum Aeroworks 71" rear wing, 14" chord
- Seibon Carbon rear hatch
- Racing Shields rear lexan window
Safety
- Mesh window net
- Schroth belts through 2020
- Sparco Pro-ADV seat
- Cage w/ NASCAR bars driver side
- Fire system w/ 3 nozzles
I am floating the idea of moving on to other classes, so I have my Zed up for sale. Here are the details:
Never wrecked, it is currently setup for NASA ST3. Original owner since taking delivery in July 2005. Maintained and built by Japtrix/Pros Tuning in West Palm Beach, FL. Additional photos or info available by calling 954-732-6426 or emailing me at obzezzed350@gmail.com. Price is 35k.
Overview:
- 5 Hours on built engine, 314whp, 284tq on E85
- 5 Hours on new OEM 6 speed transmission
- 3218 lbs with 190lb driver, and 3/4 tank of fuel
- Turn key w/ Traqmate, Cool Shirt included.
- 2 sets of Enkei RPF1s (18x9.5)
- NASA/SCCA Logbooks
Engine:
- 13:1 Compression w/ CP Pistons, Carillo Rods
- JWT S7 Cams, Ferrera Valves
- 3 angle valve job
- 7500RPM redline
- Haltech ECU paired with Uprev Flash
- Motodyne Plenum Spacer
- NWP 75mm throttle body
- Custom intake/exhaust
- Crawford Headers
- Spare block and 6 speed included
- Oil cooler
- Koyo Radiator
- Fuel transfer pump in tank to allow car to run under 1 gallon.
Drivetrain:
- OS Giken single disk clutch
- OS Giken LSD
- SPL differential bushings
- Differential cooler
Suspension/Brakes:
- Custom valved JIC FLT Dampers
- 20kg F/ 12kg R spring rates
- Stoptech ST40 Front BBK
- OEM Brembo Rear Brakes
- SPL upper a-arms
- SPL compression bushings
- SPL rear camber links
- SPL rear midlinks
- SPL lockout kit
- SPL bumpsteer kit
Chassis/Body
- Fulcrum Aeroworks front splitter w/ belly tray
- Fulcrum Aeroworks 71" rear wing, 14" chord
- Seibon Carbon rear hatch
- Racing Shields rear lexan window
Safety
- Mesh window net
- Schroth belts through 2020
- Sparco Pro-ADV seat
- Cage w/ NASCAR bars driver side
- Fire system w/ 3 nozzles
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
wanderingstuden
Maintenance & Repair
6
01-28-2016 07:03 PM
350Z Project X
Suspension
9
10-10-2015 09:23 AM