When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Purchased this but never got installed due to my buddy relocating his shop then I sold my Z.
The best of the best sir! Clicked pretty much every option here, massive 34 row, thermostatic plate, protective hose wrapping… the works! Purchased for serious track duty in hot Florida to keep oil temps under control.
What a deal, so much extra oil needed with this 34 row?
Per Z1 with the 34 row you need TWO (2) additional quarts.
My plan was to fill (as much as possible) the cooler itself with oil during install so its ready to go. This kit has a thermostatic adapter where the oil only circulates thru the cooler once its up to the temperature. So to avoid over filling you need to get the car warmed up before adding any more oil to the system. I would do this by idling the engine and rechecking the oil level with a close eye on temp and oil pressure. Then check the final oil level which will likely require topping off the system.
11-17-2018, 07:59 AM
BNIB - Z1 Motorsports Oil Cooler Kit = 34 row thermostatic plate + protected hos
