![]() |
Yep, still need to break those 14's...
Here's what I got so far. Been to the track three times now.
1st run et: 14.394 rt: 0.9982 speed: 100.561 60ft:2.4352 330: 6.363 1/8: 9.485 2nd run et: 14.365 rt: 0.585 speed: 100.267 60ft:2.360 330: 6.316 1/8: 9.441 My car is still stock. How am I doing? I know I still have a long way to go. My first few times were very much lost with tire spin in 1st and 2nd gear. I'm over that stage and now I'm at bugging it too much on the start. I'm also having a little too much 2nd gear spin and I think its because my clutch engagement is very high. I tried to adjust it with my mechanic but it was too difficult. Thanks. |
Your problem is 60-foot time. Without a respectable 60-foot time you can kiss 13.99 seconds goodbye. Why not drop the tire pressure 2 PSI with each run, and see if that helps.
|
Thanks Dave. You're always there for the boys when we don't ask something stupid!
Yeah, I'm running 35psi on 265/35/18 bald Michellins. Need tires bad. Thats why I made the thread earlier in January about which tire, don't know if you remember. But anyways, how low should I go in psi? You think my car is capable of cracking 14's decently driven? |
Originally Posted by streetracer
Thanks Dave. You're always there for the boys when we don't ask something stupid!
Practice makes perfect.:) |
I run 25 psi in my rear Nitto 275/40-18s and I have actually been able to pull a 2.0 60ft and I even have a 5AT.
|
Originally Posted by BluZee
I run 25 psi in my rear Nitto 275/40-18s and I have actually been able to pull a 2.0 60ft and I even have a 5AT.
|
davidv: how have you been doing in the car? I saw you once at capitol but we were all running slow cause of the heat. I think you were doing 14.1 at the time. You planning on coming down to capitol this spring? I'll be there the first day it opens and hopefully will see some of the my350z.com guys there.
|
Originally Posted by davidv
Excellent 60-foot time. Most likely you will want to post your times here: https://my350z.com/forum/showthread.php?t=233840
Thanks, but my ET is nothing to brag about due to the high elevation of my track. :icon43: |
Originally Posted by BluZee
Thanks, but my ET is nothing to brag about due to the high elevation of my track. :icon43:
|
What rpm do you guys launch at I am scared to launch above 4k I really dont want to fry my clutch.
|
I launch at practically no rpm. Car completely dead and once my clutch is fully engaged, i go wot. But what do i know, David or Alberto or Jeremy or somebody good should answer that.
|
Originally Posted by streetracer
I launch at practically no rpm. Car completely dead and once my clutch is fully engaged, i go wot. But what do i know, David or Alberto or Jeremy or somebody good should answer that.
yeah thats pretty much what I do as well because it seems like every time I launch hard I loose traction and it wont catch until I shift. |
Originally Posted by gNaRKiLL
yeah thats pretty much what I do as well because it seems like every time I launch hard I loose traction and it wont catch until I shift.
|
Originally Posted by bigslim350Z
davidv: how have you been doing in the car? I saw you once at capitol but we were all running slow cause of the heat. I think you were doing 14.1 at the time. You planning on coming down to capitol this spring? I'll be there the first day it opens and hopefully will see some of the my350z.com guys there.
I race Summit ET on Sundays at Cecil County. In July and August I might go to Capital at night just for fun. |
Originally Posted by streetracer
There's no need to be ashamed. It can't be worse than mine. You can make a note of the elevation. Everyone knows NA cars are slower at higher altitude.:)
OK, twist my arm. My best is a 14.33 @ 98mph. Elevation is a little over 3,000ft. Stock I would run 14.9-15.0. |
Originally Posted by BluZee
Thanks, but my ET is nothing to brag about due to the high elevation of my track. :icon43:
As for the launch... yeah.. don't do what you're doing.. Read up on the forums and get a general idea as to how you should be doing them. You'll soon find out. Nobody ever taught me how to launch or how to shift on the track or any track related info. I'm still learning, but I think I've made good progress so far. Good luck. |
with a nice 60ft time you will do much better......good luck
|
1 Attachment(s)
Well people, I have cracked it. I did a few mods since the thread started when I was stock. The new mods are: Injen SES, TP, Spacer, pop, 3.9FD, Quaife LSD. Oh, I still need tires! Thanks to David and all the people that contributed to my times improvement.
|
good job!!!
|
Originally Posted by streetracer
Well people, I have cracked it. I did a few mods since the thread started when I was stock. The new mods are: Injen SES, TP, Spacer, pop, 3.9FD, Quaife LSD. Oh, I still need tires! Thanks to David and all the people that contributed to my times improvement.
|
| All times are GMT -8. The time now is 04:50 AM. |
© 2026 MH Sub I, LLC dba Internet Brands