![]() |
It's 2014 what are you doing with your life. Drag update thread
Been pretty dead around here lately. What's everyone doing? Any new ideas. New setups? Anything going on? Post!!!!
I'm getting tired of buying parts to outrun myself... |
Clearly the answer is nothing. Lol
|
agreed its dead. lets go on the370z and hurt their feelings in their drag section
|
I haven't been up to much. Bought a house so been busy with that. It's so sad because I have a Motordyne exhaust and Stillen headers sitting in boxes in my garage. I keep saying I'm going to install the exhaust next weekend and then take it to the track. Unfortunately next weekend has not arrived yet.
One day I'll get around to installing them. :icon43: |
Ran a best of 14 flat at 100mph... Doubling up payments to pay off around tax time... Purchase another reliable vehicle... Then buy et street radials, line locks, quaife diff, maybe gears still debating if I want to give up the f.I. dream or not
|
I hit the drag strip this past weekend way down south. I've never owned a rwd car, only fwd, and awd. With the heat, and my inexperience I wasn't expecting much, just lots of fun. I managed one nice run on the day.
03 Touring Manual 60 ft: 1.95 1/4 mile 14.0@97 mph Temp: 89F I had a lot of fun just learning the 350z, this one is an 03 Touring, no mods really, looks like an aftermarket intake of some sort. I really enjoyed learning the shift points, getting used to how the car feels. Tried to avoid the water as much as possible, did spin the tires to remove any water or dirt, but no burn outs. Shifting into 3rd seemed to give me some shifting woes. I just couldn't get a smooth shift into 3rd, wanted to grind a bit every time. I figured that was just driver error possibly. I was very happy with my pb in this car considering the hot summer day, and my lack of experience in a 350z. On a nice cool day, she could break into the 13's. |
^^ Probably syncro ^^ Mine has been doing it for years.
I just crank it in 3rd like the grind wasn't there |
I'll be hitting the Drags in November. I've made a few very minor changes.
1. old test pipes were 2-1/4 diameter with resonators, Now ones are 2-1/2 without resonators. Noticable difference. 2. added the RMJ Clutch pedal assembly. I've got a 6 puck and the tires dead hook now, so I need to be able to control the rpm better getting out of the hole. Best 60ft without the RJM was 1.60, so maybe I can improve on it. My goal is 10.90's @ 129mph |
Originally Posted by OldManZ350
(Post 10430785)
I'll be hitting the Drags in November. I've made a few very minor changes.
1. old test pipes were 2-1/4 diameter with resonators, Now ones are 2-1/2 without resonators. Noticable difference. 2. added the RMJ Clutch pedal assembly. I've got a 6 puck and the tires dead hook now, so I need to be able to control the rpm better getting out of the hole. Best 60ft without the RJM was 1.60, so maybe I can improve on it. My goal is 10.90's @ 129mph theres a drag going on at PBIR August 16th by SRMS. if i get my headlight fixed by then maybe ill see you there! |
what is PBIR?
|
Originally Posted by OldManZ350
(Post 10430797)
what is PBIR?
It's a quarter mile drag strip seems to be pretty popular should have a decent turn out I believe its 25$ to race which is pretty cheap |
Originally Posted by OldManZ350
(Post 10430785)
it.
My goal is 10.90's @ 129mph |
Cmon now^.... With ~380whp in a z you should be around 12.0 or real low 12s
|
Come on up to Bradenton, this is where I go!
PBIR is 240 miles from my house.
Originally Posted by FOOKhonda
(Post 10430994)
PBIR = palm beach international raceway they are doing an event held by the Street Racing Made Safe (srms) program which is to educate kids on the dangers of street racing I really want to go and show some support but I don't know if I can cause its not too legal to drive with one headlight
It's a quarter mile drag strip seems to be pretty popular should have a decent turn out I believe its 25$ to race which is pretty cheap |
true, it is a long ways for me as well, i live in Ocala, but i was only gonna go for the program to show support, and i had a few friends going, and one of their brothers live down there so i was gonna go race his honda that he built, figure itd be funny
what track do you go to? ill look it up and see how far it is.. do they do regular test&tune pretty often? |
Originally Posted by Bmurray350z
(Post 10431080)
Cmon now^.... With ~380whp in a z you should be around 12.0 or real low 12s
|
Man it is a long way for you.
Bradenton Motor Sports Park http://www.bradentonmotorsports.com Mostly I've gone 1-2 times a year between Nov and March But, last season I made it 3 times, and plan to do the same this year, starting October 19 I need 10's .......
Originally Posted by FOOKhonda
(Post 10431169)
true, it is a long ways for me as well, i live in Ocala, but i was only gonna go for the program to show support, and i had a few friends going, and one of their brothers live down there so i was gonna go race his honda that he built, figure itd be funny
what track do you go to? ill look it up and see how far it is.. do they do regular test&tune pretty often? |
right on, i like the fact the run test and tune and other open events on days other than just saturday or sunday, its definitely closer than PBIR but its still quite a ways away. ill have to come out there sometime though
whats it usually cost to race cant seem to find that info, say on any ordinary day like T&T? |
????
Originally Posted by iideadeyeii
(Post 10431071)
Dafuq. I'll be happy with a 12.8 with my turbo'ed stock motor...you're crazy
|
$12 to $15
Originally Posted by FOOKhonda
(Post 10431279)
right on, i like the fact the run test and tune and other open events on days other than just saturday or sunday, its definitely closer than PBIR but its still quite a ways away. ill have to come out there sometime though
whats it usually cost to race cant seem to find that info, say on any ordinary day like T&T? |
| All times are GMT -8. The time now is 09:17 PM. |
© 2026 MH Sub I, LLC dba Internet Brands