MY350Z.COM - Nissan 350Z and 370Z Forum Discussion - Jim Wolf 350Z Clutch/FlyWheel Combo 07+ HR $760 Shipped

http://www.conceptzperformance.com/i...orumBanner.jpg

Hey 350Z owners, we just got in these new Clutches and Flywheels for HR Engines. Fast 3-Day shipping to anywhere in the lower US for only $760.00 shipped for the Clutch/Flywheel Combo. Place your order and we ship it out the same day! Just click on "Add to Cart" to be directly linked to our website to easily place your order. Simply put "My350Z Quote" in the comments section and we will manually change your pricing. PM me for pricing to different countries.

Free Parts Include: Alignment Tool, Stainless Steel Braided Clutch Line

Brand New Nismo Pilot Needle Bushing : Free!

Only we provide the Alignment Tool in our combo.

JWT 350Z Clutch / Flywheel Combo w/ Bonus Free Parts, $760.00 Shipped!!

https://conceptzperformance.com/item...ginal/main.jpg

Or if you just want to order the clutch, we are selling them for $420.00 shipped!

JWT Heavy Duty Clutch 07+ HR Engine 350Z, $420.00 Shipped!!

http://www.conceptzperformance.com/C...ages/2688l.jpg

JWT Replacment Flywheel Friction Plate Insert, $75.00 Shipped!!

http://www.conceptzperformance.com/C...ages/3392l.jpg

Replace your Concentric Slave Cylinder w/ the lastest revision from Nissan.

Nissan OEM 350Z Concentric Slave Cylinder 07-08, $91.00

http://www.conceptzperformance.com/C...ages/4590l.jpg

For Higher Torque Rating, we recommend the ZSP Heavy Duty Slave Cylinder.

ZSP 350Z Heavy Duty CSC Concentric Slave Cylinder 07-08 HR, $325.00

http://www.conceptzperformance.com/C...ages/4592l.jpg

Description: After many months of testing and design we at Zspeed Performance have came up with an affordable aftermarket slave cylinder design for the HR and VHR cars.

We have now logged over 20,000 miles in multiple cars with 0 CSC failure even with heavy aftermarket clutches. The design work/product has been done for months but we felt it was something that needed to be tested in cars for many miles before just selling them to you guys, We wanted to make sure these are going to hold up for the long run. With our extensive testing we are now satisfied with the results and have decided to release them to the public.

Instead of modifying the Stock OEM plastic concentric slave cylinder that have known issues we decided to use a much better designed, heavier duty slave cylinder in our new kits.

The kits come complete with everything you need to install, No other parts are needed other than a couple jars of FRESH SEALED CONTAINERS of Dot 3/4 brake fluid.

It will be necessary to modify the front cover of the transmission slightly in order to fit the bigger, heavier duty slave cylinder into the transmission housing. This takes about 10 minutes and is pretty simple to do. All instructions are included with the kit or will be e-mailed to you in PDF format.

The ZSpeed heavy duty slave cylinder kit features all metal/aluminum construction, Floating internal seal (better than stationary that is used in the OEM Slave) All stainless fluid hoses that delete the stock rubber hose by your exhaust.

Though it is rare to see a warranty with after market performance parts we are so confident with this new slave kit that we are going to offer a warranty on the slave itself for 3 months from date of purchase when purchased and used with any Southbend DXD clutch kit purchased from ZSpeed Performance. Since we know these kits are made to the correct specs we are able to do this. Warranty only covers failure within the slave cylinder for defects, This will not cover slaves that were installed incorrectly, Lines that were not flushed out before install etc. Returned slaves will be inspected for debris and dirty fluid upon return. It is imperative that the install instructions are followed and lines flushed of old contaminated fluid to insure long slave life. Any failed slave cylinders will be replaced with new slaves one time only within the warranty period. No labor or any other fees will be refunded.

We have 2 different kits available to work with whichever clutch kit you may have, Stock, Aftermarket, flat finger or rounded finger designs. The ZSpeed slave kit will work with any aftermarket clutch with the exception of RPS/SZ kits, We have not been able to check this kits height as it uses an out dated 300zx pressure plate.