Wideband oxygen sensors
#21
New Member
Thread Starter
Join Date: Sep 2002
Location: Colorado Springs, CO
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jesseenglish
Hey, did you happen to notice if it was capable of any logging? If so, I'd consider switching for a smaller unit like that.
Hey, did you happen to notice if it was capable of any logging? If so, I'd consider switching for a smaller unit like that.
I just wanted to let you know about AEM's newest widebands. One is available as a box that can be mounted either in cabin or underhood. The second was just released to us at the SEMA show a couple of weeks ago. It is an air/fuel ratio gauge. Both of them have both a 0-1 volt and 0-5 volt output. The 0-1 volt output can be wired back into the OEM computer while the 0-5 volt can be used for data logging and tuning. If you are interested, please let us know. Just call us toll-free at 866/350-TUNER. You can ask for Audra, Mason, or myself. Hope this has helped.
Shawn @ Street Sports
www.streetsports.com
www.350tuner.com
#25
found some pics of the AEM unit at sema, thought it might be of interest to some
http://forum.aempower.com/bbs/viewto...=3534&start=60
from the thread, apparently they are going to come out with a full unit with the built in controller and later on some gauges without the controller for their existing product
http://forum.aempower.com/bbs/viewto...=3534&start=60
from the thread, apparently they are going to come out with a full unit with the built in controller and later on some gauges without the controller for their existing product
#26
Originally posted by ether
found some pics of the AEM unit at sema, thought it might be of interest to some
http://forum.aempower.com/bbs/viewto...=3534&start=60
from the thread, apparently they are going to come out with a full unit with the built in controller and later on some gauges without the controller for their existing product
found some pics of the AEM unit at sema, thought it might be of interest to some
http://forum.aempower.com/bbs/viewto...=3534&start=60
from the thread, apparently they are going to come out with a full unit with the built in controller and later on some gauges without the controller for their existing product
#27
Registered User
Join Date: Sep 2002
Location: So Cal
Posts: 1,368
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ether
found some pics of the AEM unit at sema, thought it might be of interest to some
http://forum.aempower.com/bbs/viewto...=3534&start=60
from the thread, apparently they are going to come out with a full unit with the built in controller and later on some gauges without the controller for their existing product
found some pics of the AEM unit at sema, thought it might be of interest to some
http://forum.aempower.com/bbs/viewto...=3534&start=60
from the thread, apparently they are going to come out with a full unit with the built in controller and later on some gauges without the controller for their existing product
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
Colombo
Forced Induction
35
11-09-2020 10:27 AM