Hey guys. New to this forum. I actually own a Titan.

And installing a custom set of JWT cams that Clark and I decided would be worth a try lol.

First titan to be utilizing this particular cam combo for the 07+ vk56de with cvtcs on intake side.

C8 272dur/.473 lift intake with offset lobe centerline to retain full advance of cvtcs 130 lobe centerline

S7 262.5 dur/ .450 LIFT 108 centerline

I will post cam spec card.

I'm also the guy who came up with the MGT90 90mm LS2 snout graft to the titan manifold working in conjunction with peakspeed. If any of you follow that stuff.


Anyways back to VQ cylinder head.

Can anyone tell me what the exhaust port roof and floor lengths are on either vq35de or HR.

Unless someone happens to have it for vk56 by chance.

Thanks guys!



Vk56de 07+ with cam phasers on intake





This is my titan the cams are going into.

 

Also I've been playing with the pipemax software which is pretty neat.



Pipemax v3.98 messing around with different options.

 

sub'd