MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   Engine & Drivetrain (https://my350z.com/forum/engine-and-drivetrain-50/)
-   -   Car won't run (https://my350z.com/forum/engine-and-drivetrain/614577-car-wont-run.html)

lambodz350 Feb 5, 2017 09:38 PM

Car won't run
 
Hi everyone I got a 03z last year I took it to a show and race. The car started smoking bad whe I first pulled it off the trailer so I took it parked it in the show. When it came time to take it down the track I cheeked it all over everything seemed fine. On the way over started to smoke again. So I took it straight to the trailer and took it home. When I got home to unload it it would not start. So we got it in the garage got it up in the air found out the oil return line from the turbo had twisted like 10 times have no idea how this had happened all claps were tight. Fixed the line started to pull things apart found oil in cylinders 5 and 6. All the other cylinders were good so I got those cylinders cleaned out. I replaced all the plugs. It's getting spark and pulled the fuel injectors and it's getting fuel. Also replaced the crank sensor and cam sensors. I'm now at a lose if anyone has had this problem or got any answers that would be awesome thank you

knuckles899 Feb 6, 2017 05:02 AM

I would get a compression and leakdown test done to see if the rings got smoked.

lambodz350 Feb 6, 2017 03:45 PM


Originally Posted by knuckles899 (Post 10859783)
I would get a compression and leakdown test done to see if the rings got smoked.

ok will I still need to do that if the car will idle but as soon as you hit the gas it kills it

knuckles899 Feb 8, 2017 06:57 AM


Originally Posted by lambodz350 (Post 10860000)
ok will I still need to do that if the car will idle but as soon as you hit the gas it kills it

Some of the more knowledgeable members may know....you could have another issue but a compression leakdown wouldn't hurt to know. Generally oil in the cylinders could be worn rings or valve seals....it's hard to say.


All times are GMT -8. The time now is 05:56 PM.


© 2026 MH Sub I, LLC dba Internet Brands