It has begun (Pt 3)
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: CORONA, CALIFORNIA
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
It has begun (Pt 3)
Ok, if you have not heard the story as of yet....let me just break it down to you by telling you that ....... my TT spike the boost up to 10psi and I didnt even know it.....until.....tooooooo late....
#3
Registered User
Thread Starter
Join Date: Jul 2003
Location: CORONA, CALIFORNIA
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
engine rebuild pt1
Needless to say the engine needs to be rebuilt.....soooooooo...new pistons (xtpro) and rods (crower) have been bought and are in the process of being installed...yes i have pics, but i cant attactch them....ill keep trying....
#7
Registered User
Thread Starter
Join Date: Jul 2003
Location: CORONA, CALIFORNIA
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
more
...here is whats happening in case u dont believe me....the engine has been dropped...
of course the pic is too big to post....any suggestions out there as to how to post this dam thing?
of course the pic is too big to post....any suggestions out there as to how to post this dam thing?
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jul 2003
Location: CORONA, CALIFORNIA
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
Well, I had the Greddy profec e01 installed and also my defi gauges installed at the same time (by Superautobacs). After that they drove the car down to MOB to get it painted. I picked the car up 3 days later and it looked great. The work they did on the inside was great except for the mounting of the greddy screen. I then drove it a couple of days after that......when one day....I ran into this 03 c5. We looked at each other and it was on.....he took off....and then i got on his tail....I then got next to him and punched it....i hit about 130mph and then let off the gas when all of this white smoke released from back of me onto the vet. We pulled over at the next gas station off of the 91fwy and I thought I was going to ****.....the car was sounding good but I was still scared. The driver got out of the car and said nice kill. He then proceeded to tell me to go and get my car checked out because he thinks that I may have blown a gasket. My mechanic came to my house that saturday to look at my car and drop some parts off and he took the car to the shop. The next day after he ran a leakdown test, he proceedes to tell me that my psi level (which was supposed to be at 200+psi) was at about 160psi. He then says that he thinks my rings were shot and the rest is history....
#9
Registered User
iTrader: (3)
Join Date: Dec 2002
Location: Huntsville, Alabama
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
sounds like you're making the best out of the situation.
i've been using Microsoft Office Photo Manager lately to resize pics. it has a bunch of pre-set sizes (for example 640x480) so it only takes a second to resize pics.
i've been using Microsoft Office Photo Manager lately to resize pics. it has a bunch of pre-set sizes (for example 640x480) so it only takes a second to resize pics.
#10
Registered User
Thread Starter
Join Date: Jul 2003
Location: CORONA, CALIFORNIA
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
Guys just to let you know, I have tons of pics to show you, but I cant attach them because they are too big. Does anyone know how I can attach them, other wise, the next thing you will be seeing is another pic o fmy car in 2 months when the engine comes back from the shop being resleeved (AEBS). ....... and by the way, the car will be pushing around 450-475hp when it is completed....see you guys in 2 months...
HOLLA!!!
HOLLA!!!
#17
Registered User
Thread Starter
Join Date: Jul 2003
Location: CORONA, CALIFORNIA
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
remember the good ol days
Ok guys & gals...remember this pic. The next pic you see will be without the wing and the car will have 20" GTC's on it. ....... and yes the rims on this car are still for sale.....at a new price of $2200 out the door....south county only (unless you drive down here to pic them up...
#19
Registered User
Thread Starter
Join Date: Jul 2003
Location: CORONA, CALIFORNIA
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
its a mistery as to what caused the spike. One theory is that when Superautobacs installed the kit, they did not attatch the controller to anything which left it laying on my shif boot. when ever i would make a turn the controller would fall on the floor thus causing me to kick the controller. maybe i kicked it up to 10psi i dont know...but my mechanic says that i was probably at 400hp+ easily....
#20
Sponsor
Forged Performance
Forged Performance
iTrader: (92)
Sounds possible. IF you push the main dial in on the controller, it puts the Profec into learning mode....one more "turn" of that dial, you are increasing boost...rapidly...so its possible after a few kicks and steps on that controller, you inadvertently kicked the boost waaaaaay up.
Sorry to hear this..but I'm glad it didnt destory the motor entirely, and just did some ring, headgasket type damage.
Sorry to hear this..but I'm glad it didnt destory the motor entirely, and just did some ring, headgasket type damage.