![]() |
13.0 @ 103 with only 4 bolt-on's !!!!!!!
mods are in my sig...
I was shooting for a 12.9 but the weather was alittle crappy so it didn't happen.... here's teh video for it and i'll try to post a picture of the slip later... If not i can type up the slip here. http://idahostreetracing.com/gallery...8/Sith13_0.wmv |
wow you must be one hell of a driver!
|
windy day?
:p jk |
holy crap..great driving
|
Must have been the Fairlady badge that put you over the top!
jk Nice driving! Congrats! |
My bolt-on hero!
but tell me this, is it drag racing ediquitte to round down to the lowest number? I have seen this done several times. What was your 60ft? What tires were you on? Great Job!!!! Chops |
Thanks everyone.....
as far as tires i was on M&H slicks that are for a front wheel drive car.. i borrowed them from a buddy's SRT-4. my 60'ft on that run was a 1.76.. The run before that i cut a 1.75 all day i was running low 13.1's and that 13.09. as far as what you said chops... Rounding trap speeds as far as people that i know and hang out with as long as it's like 109.6 or higher it's ok to say you trapped 110. But asfar as ET goes... If the first # after the decimal is a 0 then you ran a 0... It doesn't matter if i ran 13.0999999999 i still ran a 13.0... least that's how me and friends go by anyways. |
What size rims are the slicks on? I am looking to get a good setup for some DRs and need some rim suggestions. I plan on putting some Nitto or BF drag radials on. I am sick of ruining my expensive 19" Toyos and I know the smaller rims + DRs will make a huge difference.
|
don't waste your money on drag radials.. They just break stuff..
Just get slicks. All DR's do is wheel hop and break stuff.. The slicks are i believe 23x8.5x15 i'm pretty sure those are the size of the 1's i ran this weekend. My other friend has 24x8.5x15's and they seem to work just as good maybe alittle better on my car. with the 23x8.5x15 i was having to shift to 5th gear right before the finish line. |
hehe it sounded like you were power shifting or whatever.. where u leave your feet on the gas when shifting.
|
all i can say is u must shift like a god... nice job man.
|
It took me awhile to realize that it was 13.0 not 14.0 :icon11: Great run!
What was your launch RPM? Did you gut your interior? 1 gallon gas tank? Other than 4 bolt ons, have you done some tuning? Temperature, elevation? I would have been skeptical 'bout it but the video says it all. |
holy smokes!! nice run man!
|
what did you launch at on those slicks compared to what you launch at on street tires?
|
Very nice times.
|
so what is the diamater (height) of those tires?
smaller tires & more grip = hauls donkey and will accelerate a heck of alot faster... stock diamater & more grip = better grip and moves... I have a feeling if you put those wheels and tires on a stock car the time would have been about the same... but nice time! |
Originally posted by sith don't waste your money on drag radials.. They just break stuff.. Just get slicks. All DR's do is wheel hop and break stuff.. The slicks are i believe 23x8.5x15 i'm pretty sure those are the size of the 1's i ran this weekend. My other friend has 24x8.5x15's and they seem to work just as good maybe alittle better on my car. with the 23x8.5x15 i was having to shift to 5th gear right before the finish line. |
Wouldn't the M&H be considered a 5th bolt-on? It's not OEM obviously.
Great time none the less. |
nice times ! congrats...
|
excellent run. were you able to repeat it by chance?
|
| All times are GMT -8. The time now is 03:23 PM. |
© 2026 MH Sub I, LLC dba Internet Brands