Vq35de?hr?revup?
#1
Registered User
Thread Starter
Join Date: Jul 2018
Location: Phoenix Arizona
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Vq35de?hr?revup?
So plain an simple needing to figure which engine an year is best for drift car swap. My goal is to make a drifting sleeper that is never been done to my knowledge. So between the vq35de or hr or revup an if there is a better one that is cheapest tbh budget is key sense its a never been done swap that i know an a bunch of fab work i can do myself but gonna keep na for now. an if i can get the vq35de from a an xterra or frontier need whole vehicle for the swap. i thank you all ahead of time.
#2
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
So plain an simple needing to figure which engine an year is best for drift car swap. My goal is to make a drifting sleeper that is never been done to my knowledge. So between the vq35de or hr or revup an if there is a better one that is cheapest tbh budget is key sense its a never been done swap that i know an a bunch of fab work i can do myself but gonna keep na for now. an if i can get the vq35de from a an xterra or frontier need whole vehicle for the swap. i thank you all ahead of time.
More general hot rod parts readily available for it and a wealth of knowledge about them, even more than HR.
This is all presuming we’re not talking Z chassis, right? (Else why the comment regarding alternate sources...)
#3
Registered User
Thread Starter
Join Date: Jul 2018
Location: Phoenix Arizona
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
DE is going to be least expensive route. Note I didn’t say “cheap”. Relative to other engines, e.g., Honda or Chevy as examples, the VQ isn’t a cheap engine to build CORRECTLY. But not prohibitive.
More general hot rod parts readily available for it and a wealth of knowledge about them, even more than HR.
This is all presuming we’re not talking Z chassis, right? (Else why the comment regarding alternate sources...)
#4
Registered User
Thread Starter
Join Date: Jul 2018
Location: Phoenix Arizona
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
DE is going to be least expensive route. Note I didn’t say “cheap”. Relative to other engines, e.g., Honda or Chevy as examples, the VQ isn’t a cheap engine to build CORRECTLY. But not prohibitive.
More general hot rod parts readily available for it and a wealth of knowledge about them, even more than HR.
This is all presuming we’re not talking Z chassis, right? (Else why the comment regarding alternate sources...)
Thread
Thread Starter
Forum
Replies
Last Post
marcelz
Intake Exhaust
11
11-21-2006 01:10 PM