Squid1907

Okay so here's the issue. On the 2005 350z there are 2 fans mounted on the radiator as we know. Each fan has its gray connector that connects the fans wiring to the car harness. The issue is that during repairs the grey male connector from the harness came off so now ive got to reconnect the wires from the harness to the connector i got from another 350z (its a Fairlady Z) but the wiring colors are different. Its for the AC fan to turn on, any help on the wiring color codes and/or where to place them in reference to each 'slot/pin' on the connector?

Hope somebody can help it would really save the hassle and money

bealljk

iTrader: (13)

I've sorted this out in my TT build thread ... if you cant find it let me know. In the mean-time take pictures of what you have to ensure were all on the same page.

karlt

Squid1907

Here's an excerpt from the service manual showing fan wiring and wire color codes.

Squid1907

Thanks so much guys this is a life saver!!

Erick_m0227

I recently installed a new aluminum radiator in my 2006 Nissan 350z. Since I installed the new radiator the oem fans were to big so I upgraded to slim fans. When I got the new fans I realized they each only had two wires which were blue and black but on the male connectors on my car they have 4 wires blue/black/green/yellow. What wires do I hook up? I don’t want to just start cutting them and I am new to this anyone have any ideas?

ajpasa

Check the PDF that was posted in this thread.