LSX (5.3) swap
I had a thread I started back in 09 but thought I'd start a new one.
I'll update this over the next few days but I'll start it with the good part. 1st start was yesterday and I got to drive it down the road (about a 1/2 mile or so)! Now to start working out the bugs. And yes my car needs a paint job, its had a hard life and paint, new bumper will come! https://cimg2.ibsrv.net/gimg/ls1tech...76ea44b95b.jpg https://cimg3.ibsrv.net/gimg/ls1tech...5f3c076ecb.jpg |
Nice SRT, that 350 is going to be loud as crap, unless you change that exhaust.
|
Originally Posted by Conway_160
(Post 10681699)
Nice SRT, that 350 is going to be loud as crap, unless you change that exhaust.
At idle you its not loud, but you are right at WOT it will be! |
I'll start by saying this was a long project. I wanted to do this without useing a swap kit and made everything my self. Needless to say I installed, made mounts and so on more than a handful of times and wasted more money on parts then I want to count !
My gauge set up, some cheap sunpro gauges in the stock three gauge holder, a speedhut tach and a APSX D2 wide band in teh door vent https://cimg1.ibsrv.net/gimg/my350z....dea161a249.jpg https://cimg2.ibsrv.net/gimg/my350z....bfd5304fdf.jpg https://cimg3.ibsrv.net/gimg/my350z....74136dbf4d.jpg https://cimg4.ibsrv.net/gimg/my350z....9a165d2b1b.jpg |
I have a DBC TB so drilled a hole in the stock pedal to hook the cable, alot of adjustment but got it right. Then a hurst promatic 2 installed and working with the stock 350Z shifter boot (was a 6 speed car)
https://cimg6.ibsrv.net/gimg/my350z....36a35984ff.jpg https://cimg7.ibsrv.net/gimg/my350z....97d19ea866.jpg https://cimg8.ibsrv.net/gimg/my350z....acb40512d2.jpg https://cimg9.ibsrv.net/gimg/my350z....b108ccf263.jpg |
some pics from when I was making the hotside for the turbo
All v Bands with flipped over stock truck manifolds https://cimg4.ibsrv.net/gimg/my350z....685b8b8ab6.jpg https://cimg6.ibsrv.net/gimg/my350z....177129f520.jpg https://cimg7.ibsrv.net/gimg/my350z....476ee1f915.jpg |
installed ls6 valve springs cleaned up motor and wanted Red covers!
Then installed motor for last time, made my own belt drive and started wiring https://cimg1.ibsrv.net/gimg/my350z....3a524e36f7.jpg https://cimg2.ibsrv.net/gimg/my350z....548234c2f0.jpg https://cimg4.ibsrv.net/gimg/my350z....21555679c6.jpg https://cimg3.ibsrv.net/gimg/my350z....9f33e86188.jpg |
mounted intercooler and made a rad bracket
https://cimg8.ibsrv.net/gimg/my350z....326e10758a.jpg https://cimg7.ibsrv.net/gimg/my350z....53083cdf52.jpg https://cimg9.ibsrv.net/gimg/my350z....b5c8bfd5c3.jpg |
showing where the turbo is mounted , has a bracket welded to the frame. Then my downpipe
https://cimg1.ibsrv.net/gimg/my350z....77adfccca3.jpg https://cimg2.ibsrv.net/gimg/my350z....585d47649f.jpg |
Here is when I 1st started and nothing is the same
https://my350z.com/forum/engine-and-...x-03-350z.html Also I'll see about posted links to the parts I used for mounting |
1st motor was junk (think it set for to long or go some dirt in it over the years) so pulled it and swapped in a another junkyard 5.3 and the new motor sounds awesome. Did to finish getting it back together then time for a tune
Vid of the new motors 1st start |
Gonna get it tuned in the next week or two and then some full boost vids, planning on running around 15psi
I had alot of people asking about how loud it was with it dumped out the drivers side bumper so I just made a little vid (this is with both windows down |
Looking good bro..
|
Originally Posted by Royal_T
(Post 10701230)
Looking good bro..
|
Still working on the tune but it builds boost quick
|
Sounds good.
|
Originally Posted by CUL8ER
(Post 10718561)
Sounds good.
In the drivers seat it sounds awesome. Last night rolled into it a little over half throttle and it builds boost so fast, was at 7lbs before I knew it and going 80 in a 45 :eek: could have been bad if I would have passed a cop. CUL8ER I was just looking at yours and damn, now thats a nice clean build! |
What are you doing about getting it inspected?
|
Originally Posted by mastatikle
(Post 10725387)
What are you doing about getting it inspected?
|
Dear lawd this is beautiful! :thumbup:
Someday I will do this, just need a new DD other than the Z lol |
All times are GMT -8. The time now is 03:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands