Complete LSx Install Kits for your 350z!
 

Here at Sikky we pride ourselves on our ability to make our customers lives easier. With our complete LSx install packages we offer we take the guess work out of an otherwise complex swap.

These packages include all of the difficult parts one would need to source during the swap including, and is one of the most complete packages on the market -

Billet Urethane Engine Mounts
Aluminum Race Oil Pan
Remote Oil Filter Mounting Kit
Transmission Crossmember and Mount
Billet Short Throw Shifter
Hand Welded 1 3/4 (or 1 7/8) Stainless Steel Headers
Air Intake
Fuel Line Kit
Clutch Master Cylinder Kit
Power Steering Lines

These packages start at $3250 and most of these parts are on the shelf ready to go.
http://www.sikky.com/product/350z-ls...ete-mount-kit/


If you have any questions in regards to the package or parts we offer feel free to post, PM or call me at the shop.

Aaron
410 780 0009


https://cimg3.ibsrv.net/gimg/my350z....a0045d1940.jpg



https://cimg4.ibsrv.net/gimg/my350z....338511d351.jpg

https://cimg5.ibsrv.net/gimg/my350z....f0298ed5d5.jpg

https://cimg6.ibsrv.net/gimg/my350z....5fe3674e6b.jpg

well sikky you may have pride but why not help us keep the nissan brand?!?!?!?

I am almost done on my vk56de swap into my 2004 g35.

There is absolutely no one doing enough for this.
Read this website and see the desire to keep the brand.

I have over 9,100 views on my build and I am shortly wrapping it up.

If I had support for a company with such "devotion" I would have been done already. Instead I have had to beg borrow and steal for over a year, threaten and plead with people that promised me parts.

Help us devoted people keep the brand and make vk56## swap parts

Because they are supporting what sells/works. Nobody wants to do a crazy swap, with another engine that has no support/potential.

I can find basic parts to build a 1000hp LS engine in a few minutes, for a couple thousand bucks. Show me the same setup on a VK. Not gonna happen.

The reason everybody supports the LS swap, is because it WORKS. It is, without a doubt, the best power/$$ platform right now, they are readily available, super reliable, and super capable. It's neat to stuff a nissan V8 in there (I think they should have stuffed the 45 engine in there, it would fit and it's a sweet engine), but it's gonna be custom because nobody really cares.

^^^ this ^^^ I would never put anything other than a LSx engine in the Z if I were to do a swap. The aftermarket support for those engines are ENORMOUS. The Vk56 swap is cool and all, but very impractical.

yes no one can deny that the LS has been around since, dirt? basically.

Problem is, not you obviously, people are notoriously devoted to the Nissan brand.

A corr II engine was built and made 715HP N/A......
Haven't seen that kind of number on a LS* yet... Yet. personally

Support is not dead by any means.

JWT - springs, retainers, numerous cams, non vvt and vvt. and increasing support.
Kelford (NZ, I belive) - They do numerous and amazing cams, plus any custom cam, springs, retainers, with an incoming section.
GTM - 6.0l stroker kit and supercharger kits
Stillen - Superchargers
Uprev - preprgrammed and programmable ECM's
Neo's Garage - While his website is bare, he offers anything you want to pay for.
Collins adaptors - numerous items to adapt the vk56 to 2 or 3 diffrerent trans, but with stand alone only.
Fever racing - wire harness rebuilds for the vk56 into any platform, adaptor plates, throw-out bearing solutions (they need person and individual touches though) custom oil pans, vk56 tunes, uprev licensing, etc.
VH performance - intake flanges /w 2'' adapters, exhaust flanges, custom intake plenum.
CORR - wait did I mention the VK56** has been in GT classes and performance classes of all makes and builds, Ryan Kado, Chris Foseberg.
McKinney Motorsports - Motor mounts (same as Ryan Kado)
CP piston - piston, anything to order
Brain Crower - Con rods
Carillo - Con rods
Denso - Fuel injectors

I became minimal at the bottom of the list. However I reclaim my point. There is a bunch of support, the problem is that the support for getting the motor in the car is scarce.

If there was more support to get the motor in more cars than the cliche' market would pop off.

Creep any 350z/g35/240 thread The want this motor cause it keeps the brand.... The die-hards will only keep the brand. The die-hards and the ones who will pay the good money.

Oh wait... You have an LS..

yeah LS has been around since Before I was born, pre '82...


Why do you think the base is so hard and deep, think

LOLOLOL
Google 750hp crate lsx.

I will just laugh now.
If you can afford to spend 20k - 30k on a crate motor plus swap kit and a shop to do the sway. There is absolutely no way you would be dropping that motor in a g/z.

Now that is impractical...

Lol no. Buy tranny(don't know cost) sikky kit, get a 6k crate motor. Custom rear-mount turbo for under 1k and you can have 750whp easy for around 12k.

I seriously just googled that motor, so yes.

As for a rear mount turbo... ew
Maybe if you live in TX, or never drive it in the rain.
Why would you want your most expensive items in the place you rust the fastest?

I am not saying the LS* is a bad motor or has no potential, I think you are all misreading this.

I am saying, most people would rather stick to the same brand. Period


Besides, all of you people trying to flame me about this, I am reading your posts. Non of you are LS swapped, so why are you crying so much?

i would say some, but not most want to stick to brand

More people that I have spoken to have, Events, Shows, the thousands of people following me on this site and g35driver.

I even get messages from companies I have bought parts from asking when this will be done, they want photos and videos.

Only people I see railing down on saying the LS is better for this are people without one. And you haha

i never said it was better, just tried, true, cheap power, parts readily available.

A lot of people do is what I was getting at. I mentioned this thread, which is why I said and you.

Lol, what. People put 2k exhaust under their car and an ebay turbo for a lsx motor can be bought for $200-$250.
So, what does rain have to do with anything?
Rear-mount turbo is the easiest way to turbo a vehicle that has very limited engine bay space.

The fact is no-one is ever going to "mass" produce the parts needed to swap a vk56 into a 350z because it is not a desirable swap.

We both know it's better. C'mon. If there was a batter alternative people would be using it.

i think it is one of the better swaps, yeah. hence why people put ls's in everything from 240's, miata's, z's

Actually the first ls engines(gen III) were made in 1996, followed by gen IV's in 2003.

What is the most potent version of the LS motor I can buy as a crate motor from GM that is supported by your installation kit?