My 2jz swap
The following 2 users liked this post by chase z:
blax 350 (10-07-2018),
BluestreamDE (10-01-2018)
#163
New Member
Thread Starter
I have a few updates.
got a off the shelf 15 g flat bottone fuel cell and cut it down to about 10.5g and cut out the pickups and welding in a pump hanger to mount the megnafuel 750 internally with some added baffling.
i all so starting making a fuel cell cage to mount it in the trunk floor
got a off the shelf 15 g flat bottone fuel cell and cut it down to about 10.5g and cut out the pickups and welding in a pump hanger to mount the megnafuel 750 internally with some added baffling.
i all so starting making a fuel cell cage to mount it in the trunk floor
The following 2 users liked this post by chase z:
blax 350 (11-13-2018),
BluestreamDE (11-19-2018)
The following users liked this post:
BluestreamDE (11-19-2018)
#166
New Member
Thread Starter
#167
New Member
Thread Starter
Re doing all the intercooler piping makeing it all 3in reducing the couplers and making the air plath more direct. Allso have to clean up the trunk and wire up the relay for the fuel pump / fuel sender
#168
350Z-holic
iTrader: (13)
Nice! Love the cleaned-up/coupler delete reduction
#169
New Member
Thread Starter
got some more work done today.
But my power steering is leaking for some reason might need a rebuild kit to fit it. I want to get it done soon and dyno it before xmas
#170
350Z-holic
iTrader: (13)
#171
New Member
Thread Starter
#172
350Z-holic
iTrader: (13)
It is a workout ... I dont think I could daily a non-PS ... if you need a pump let me know - I got a few on the shelf - you can have it no cost.
Last edited by bealljk; 12-01-2018 at 09:17 PM.
#173
New Member
Thread Starter
#174
350Z-holic
iTrader: (13)
#175
New Member
Thread Starter
The following 2 users liked this post by chase z:
blax 350 (01-15-2019),
BluestreamDE (01-15-2019)
#178
New Member
Thread Starter
#179
New Member
Reveal the dyno numbers please. I'm following the build now.
#180
New Member
Thread Starter
It didnt go that well:/ had quite a few problems so no big numbers sadly. It did make 507hp at 14psi on pump gas and last time it only made 419 on 11psi on e85 .
had some boost leak problems but all that will be fixed soon trust me im ready to make some real power and hurt some feelings .
had some boost leak problems but all that will be fixed soon trust me im ready to make some real power and hurt some feelings .
Last edited by chase z; 02-15-2019 at 07:13 PM.