Notices

FS: Haltech Platinum Pro ECU with Harness and TONS OF EXTRA's for VQ35HR 07 - 08 Ni

 
Thread Tools
 
Search this Thread
 
Old 07-23-2017, 03:11 PM
  #1  
GAMERMODZoCOM
Registered User
Thread Starter
iTrader: (5)
 
GAMERMODZoCOM's Avatar
 
Join Date: Sep 2008
Location: Tampa
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Default Haltech Platinum Pro ECU with Harness and TONS OF EXTRA's for VQ35HR 07 - 08 Ni

Price Dop! Haltech Platinum Pro ECU with Harness and TONS OF EXTRA's for VQ35HR 07 - 08 Nissan 350z G35 Sedan

I have for sale my Haltech Platinum Pro with VQ35HR harness, Haltech IO Expander 12, Haltech Boost Selenoid, AEM 5.2bar MAP sensor and Haltech Wideband controller with 2 Bosch Widebands.

This was on my fully built 2008 Nismo 350Z and made well over 1,000whp. This is everything you need to do the same (outside of a solid motor and fuel).

The Expander is a must for anyone running the Haltech Platinum ECU. This is because after hooking up your MAP sensor, boost selenoid and widebands, you only have 1 input/output left. With the IO exapnder 12, you get 12 MORE input and outputs. We used them for things such as kicking the fuel pump to high at a certain load/rpm, switch for boost limitation, kicking on cooler fans, temp sensors, etc.

This is a monster of a setup at half the price and it's ready to ship immediately @ $1,500.00 (I dropped the price 8/8/17, GET IT!)

I know with the price tag, along with being on the internet, that people can be concerned with the purchase. Obviously payment will only be accepted via PayPal (for your protection and mine). I will ship this for free anywhere in the US and I do not charge PayPal fee's.

I also have another listing with my Injector Dynamics ID1000 Fuel Injectors up for sale as well. These were barely used and they are for sale at $400.

If you have any questions, feel free to contact me via facebook messenger and we can setup a phone call if needed (I hate texting).

If you have any questions, feel free to contact me via private message and we can setup a phone call.





















Last edited by GAMERMODZoCOM; 08-08-2017 at 10:08 AM.
GAMERMODZoCOM is offline  
Old 07-26-2017, 05:48 PM
  #2  
GAMERMODZoCOM
Registered User
Thread Starter
iTrader: (5)
 
GAMERMODZoCOM's Avatar
 
Join Date: Sep 2008
Location: Tampa
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Default

Bump! Price Dropped everywhere it's listed! Get it before someone else does! This is an incredible deal and I would like to see it get put to good use!
GAMERMODZoCOM is offline  
Old 07-31-2017, 08:48 AM
  #3  
GAMERMODZoCOM
Registered User
Thread Starter
iTrader: (5)
 
GAMERMODZoCOM's Avatar
 
Join Date: Sep 2008
Location: Tampa
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Default

Bump
GAMERMODZoCOM is offline  
Old 08-02-2017, 10:25 AM
  #4  
ak350
New Member
iTrader: (2)
 
ak350's Avatar
 
Join Date: Aug 2006
Location: Chicago
Posts: 161
Received 0 Likes on 0 Posts
Default

Will this work for a DE motor?
ak350 is offline  
Old 08-02-2017, 10:32 AM
  #5  
GAMERMODZoCOM
Registered User
Thread Starter
iTrader: (5)
 
GAMERMODZoCOM's Avatar
 
Join Date: Sep 2008
Location: Tampa
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes, you would need to get a DE harness though and load the stock firmware back on it. You could likely sell the HR harness for more than what a DE harness would cost you.
GAMERMODZoCOM is offline  
Old 08-08-2017, 10:08 AM
  #6  
GAMERMODZoCOM
Registered User
Thread Starter
iTrader: (5)
 
GAMERMODZoCOM's Avatar
 
Join Date: Sep 2008
Location: Tampa
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Default

Price drop
GAMERMODZoCOM is offline  
Old 08-10-2017, 10:46 PM
  #7  
koshin
Registered User
 
koshin's Avatar
 
Join Date: Jun 2013
Location: Vancouver
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

PM'd
koshin is offline  
 




All times are GMT -8. The time now is 03:09 AM.