Haltech Pro350z Platinum Pro Harness(Piggyback), Widebands, Boost Control
 

https://cimg8.ibsrv.net/gimg/my350z....d4a1c184e5.jpg
https://cimg0.ibsrv.net/gimg/my350z....7313fcc2d8.jpg
https://cimg1.ibsrv.net/gimg/my350z....2bf2ca5396.jpg
https://cimg2.ibsrv.net/gimg/my350z....793ea5d6bf.jpg
https://cimg9.ibsrv.net/gimg/my350z....a9cf665968.jpg

Dated Pic:
https://cimg8.ibsrv.net/gimg/my350z....1bb516894f.jpg





I'm parting with this 350z G35 VQDE Haltech Pro350z Pro-Harness System ECU Controller (Piggy Back). Ive out grown this setup and need to look into a standalone. I am the original and only owner of this setup. It has approximately 15k miles on it. This setup along with a OEM ecu is 100% emissions compliant. This piggyback has been pretty good to me.

If you're looking to get in the VQDE turbo / supercharger / NA tuning game this would be an excellent all-in choice at about 1/3rd to 1/2 the cost.

This is a complete setup, you'll need nothing to get going - plugs directly into the OEM ECU with no modification required. With this setup you can monitor your entire engine via a laptop while you drive / tune. Make changes on the fly, review data logs & make changes (no reflash necessary). I may have an extra Dell laptop I can include if needed(let me know if you need it).

Near-new Haltech branded O2 Sensors (approximately 5k miles on them) on the Haltech Wideband Controller.

New MAC Boost Control Solenoid that seamlessly integrate into the haltech.

I can include base maps to get you up and going. The haltech will auto-tune (closed-loop fuel control) your air:fuel ratio so getting up and going is simple.

Haltech software and data logging software included.

$1100 + shipping/insurance

From Haltech:
Platinum Pro 350Z - PRO Harness System - Nissan 350z Kit
High Performance Fuel and Ignition ECU for Nissan 350Z.

Fully programmable ECU interfacing directly with all the standard Nissan sensors and on board computer systems. Taking control of all the essential engine management tasks such as fuel delivery, ignition timing, boost levels, camshaft positioning and correction maps, the Platinum 350Z ECU even interfaces with the factory Nissan CAN bus for on-board diagnostics and troubleshooting.

Features:

- Sequential Fuel Control
- Direct Fire Ignition Control
- Variable Camshaft postion mapping
- Knock Detection
- Engine Rev Limiter
- Closed loop boost control
- Closed loop wideband 02 control
- On board data logging
- Speed density, Alpha-N or MAF tuning
- Additional user definable inputs and outputs
- Windows Software

^messaged - let me know if you have any further questions.

Sold to DNash -

Let the record show the DNash has paid in full and the setup will be shipped out Tuesday after the holiday -

Mods please close thread