Invidia Gemini exhaust
3 Attachment(s)
Selling my Invidia Gemini exhaust off of my 07 350z. It has 15,000 miles on it. The passenger side has a small crack from low clearance. The one picture shows it clearly. It is an easy fix, can be welded. If I was keeping my car I would have fixed it. The one tips rivets are also a little loose, but again it's an easy fix. I paid $900 for it new, starting the price at $500, but will consider reasonable offers because of the crack. I am located in Northern New Jersey and would prefer pickup, but can also ship if needed. my cell is 862-268-2432 for easiest contact.
Justin |
sent you a text
|
Will this fit a G35?
|
Originally Posted by Shawno72
(Post 10409940)
Will this fit a G35?
|
glws, btw the pic is wrong... the (more) curved part goes on passenger side
|
Originally Posted by travlee9374
(Post 10410001)
no, g's are longer
|
Originally Posted by Shawno72
(Post 10410048)
I thought so but was hoping it may just be longer tips or something easy.
|
Just FYI, I had talked to Invidia a few years ago and they say that the passenger side is supposed to go above the sway bar, not underneath it. Obviously too late now, but it would have kept you from scraping it.
http://velocityfactor.files.wordpres...01/350zexh.jpg |
Originally Posted by travlee9374
(Post 10410004)
glws, btw the pic is wrong... the (more) curved part goes on passenger side
Originally Posted by MatadorZ33
(Post 10410088)
Just FYI, I had talked to Invidia a few years ago and they say that the passenger side is supposed to go above the sway bar, not underneath it. Obviously too late now, but it would have kept you from scraping it.
http://velocityfactor.files.wordpres...01/350zexh.jpg |
That's a beautiful underside. :P
Wondering how much that section of the pipe would cost from INvidia. |
It's worth giving them a call. I've realized if your car is very low, single exit is the way to go. Although you can't beat the look of the dual exit
|
2 Attachment(s)
Originally Posted by jbrizz94
(Post 10410813)
Mine was mounted exactly like the picture
It's obvious that you had yours mounted like this: Attachment 403760 Vs: Attachment 403761 There's no way you could have gotten pavement scrapes on your exhaust in the spot shown in the OP unless you also destroyed your sway bar. |
FYI, the B-pipe that's destroyed will cost $150 to replace and that's w/o shipping costs.
|
Sold, please remove
|
All times are GMT -8. The time now is 04:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands