New Composite Parts manufacture: CIANCI USA / Custom 350z Parts
We just want to introduce ourself on the 350z forum as a new sponsor and a high end composite part manufacture. We currently have a shop 350z that we use to design and fabricate new parts on. We look forward to helping bring new ideas and concepts into reality.
Check us out at http://www.cianciusa.com Phone / 559-cianci-7 or email us at sales@cianciusa.com we are happy to talk to you about new group buys or new product ideas. * It usually takes around 10 people to bring a new concept into reality. We do however have very quick turn around time once there is enough interest in a new project * |
Welcome.. this is a cool concept, Hopefully more people jump on board.
|
hey these guys are awesome, big on my old board, 3si.org they make some pretty cool stuff for the 3000GT/Dodge Stealth crowd excited to see what they do for the Z's
|
What kind of parts are we talking about here?
|
|
The hood looks nice
|
How about a full flat undertray. I need one from the front axles to the rear axles. That way people can choose what front and rear diffusers they want to use.
I'm pretty sure you will be able to get 10 people on that one, and it should be pretty easy to make for a specialist composite company such as yourselves. Plus there's the fact that nobody has made one yet. |
Isn't that the same bumper as the guy who is making his own on here. I couldn't find the thread.
|
Originally Posted by can'tZme
(Post 8523040)
Isn't that the same bumper as the guy who is making his own on here. I couldn't find the thread.
Would any of you guys be interested in a custom splitter for the V2 kit in carbon fiber? How about custom canards different than the thick normal v2 canards? |
Originally Posted by can'tZme
(Post 8523040)
Isn't that the same bumper as the guy who is making his own on here. I couldn't find the thread.
|
We can pretty much build any part. We have a shop 03 350z track here to use to develope new parts on. All we need to know is what you guys want and we can make it. It takes apx 10 people for a new product to be launched.
Let us know how we can help, -Ryan |
carbon fiber splitter for V2!!
|
Flat undertray fom axle to axle
|
Originally Posted by GeauxLadyZ
(Post 8523137)
Yes, same guy.
Would any of you guys be interested in a custom splitter for the V2 kit in carbon fiber? How about custom canards different than the thick normal v2 canards? I was going to make some out of sheet metal and wrap it in CF if i couldnt find something for the sides that matches the angles of the V2. |
Out of curiosity, would you be prepared to make a one-off undertray?
|
Originally Posted by ReV2Red
(Post 8528055)
Out of curiosity, would you be prepared to make a one-off undertray?
|
Ok. Cool. I'm pretty sure the track guys here would rock a flat undertray for sure, and there are plenty of them.
|
Originally Posted by ReV2Red
(Post 8535540)
Ok. Cool. I'm pretty sure the track guys here would rock a flat undertray for sure, and there are plenty of them.
|
+ 1 on the flat undertray !
If I may make a suggestion, it would be a great idea to match some of the attachment points with the G35 coupe. GT Spec did this with their 4 point underbrace and it worked out pretty well for both camps. |
IM DOWN FOR SOOMETHING LIKE THIS, CAN BRAKE DUCTS BE INCORPORATED IN IT THOUGH, I MEAN WHILE YOUR THERE:dunno: COULD BE FEASIBLE
Originally Posted by ReV2Red
(Post 8522862)
How about a full flat undertray. I need one from the front axles to the rear axles. That way people can choose what front and rear diffusers they want to use.
I'm pretty sure you will be able to get 10 people on that one, and it should be pretty easy to make for a specialist composite company such as yourselves. Plus there's the fact that nobody has made one yet. |
All times are GMT -8. The time now is 01:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands