"PREDATOR" Design 350z led tail lights
#1
Registered User
Thread Starter
Join Date: Apr 2010
Location: Arizona
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
"PREDATOR" custom 350z led tail lights
First off I am not selling these tails here on my350z.com just showing them off. I just finished building these tail lights, let me know what you think of the design.
All of the 5mm leds have been changed to10mm. These tail lights house turn signals and reverse lights.
For more pics and videos go to:
MyLightEmittingDesigns.weebly.com
Thanks for looking...
http://www.youtube.com/watch?v=Ey5vju6WSUI
All of the 5mm leds have been changed to10mm. These tail lights house turn signals and reverse lights.
For more pics and videos go to:
MyLightEmittingDesigns.weebly.com
Thanks for looking...
http://www.youtube.com/watch?v=Ey5vju6WSUI
Last edited by 1 MEAN Z; 09-04-2010 at 07:53 AM.
#6
Registered User
Thread Starter
Join Date: Apr 2010
Location: Arizona
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
Thread Starter
Join Date: Apr 2010
Location: Arizona
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Same with the last design, that I am now calling "Evil Z". They remind me of this....
#10
Registered User
Thread Starter
Join Date: Apr 2010
Location: Arizona
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I have checked with Nissan on getting all of the plugs. They do not sell the plugs for the tail lights or OEM turn/reverse lights seperate, they are attached to the OEM lights and harnesses. The reverse/turn signal option does require a little modification to the harness in your Z. It is fairly simple; you would only have to tap in to the two wires leading to your stock reverse light, one being positive and the other negative. These are easily accessible once you remove your tail lights. The turn signals are fairly easy to tie into. This harness is also easily accessible, it is in the same location as your reverse light harness as they are located in the same housing.Your first option would be to tie in and leave your existing turn signals hooked up along with the custom turn signals.Your second option is to cut the two wires going to your existing turn signal in turn deleting them, then run the two wires you cut to the turn signal harness off the back of your custom tails.These custom tails come with new harnesses one end pre-wired to the tail lights and the other end will have to be wired in to your existing harness.
#11
Registered User
iTrader: (20)
Join Date: Jul 2007
Location: Charlotte
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Sounds great man I think the best option would be to use the oem turnsignal an the led one wish I knew how to do stuff like this I once tried to open an spare taillight I had an I did not work out at all lol
#16
Registered User
Thread Starter
Join Date: Apr 2010
Location: Arizona
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Hope that's what you wanted to know. If not let me know...
#17
New Member
iTrader: (4)
I was thinking the same thing.
1meanz,
you going to have to check the junk yard for a 350 rear clip, rest it in your backyard or garage, gut it and set it up for easy swap in and outs of all your different tails.
Know you going to get a lot of request for pics/vids on a car.
1meanz,
you going to have to check the junk yard for a 350 rear clip, rest it in your backyard or garage, gut it and set it up for easy swap in and outs of all your different tails.
Know you going to get a lot of request for pics/vids on a car.
#19
Registered User
Thread Starter
Join Date: Apr 2010
Location: Arizona
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I'm in the business of making custom automotive led lighting for people. So I probably won't be posting any pics of my circuit designs. Every item shipped from My L.E.D. is designed and manufactured by me. I would be happy to answer any questions you may have about them if you would like.
Let me know....
Let me know....
#20
Registered User
Thread Starter
Join Date: Apr 2010
Location: Arizona
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking the same thing.
1meanz,
you going to have to check the junk yard for a 350 rear clip, rest it in your backyard or garage, gut it and set it up for easy swap in and outs of all your different tails.
Know you going to get a lot of request for pics/vids on a car.
1meanz,
you going to have to check the junk yard for a 350 rear clip, rest it in your backyard or garage, gut it and set it up for easy swap in and outs of all your different tails.
Know you going to get a lot of request for pics/vids on a car.
I will keep you updated....