When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I used to be able to easily find the Nismo front bumper from my local dealership website. Can't find it anymore. I did come across a bunch of pricy yet very nice Nismo parts that I have never seen before.
I used to be able to easily find the Nismo front bumper from my local dealership website. Can't find it anymore. I did come across a bunch of pricy yet very nice Nismo parts that I have never seen before.
i seen that a few weeks ago. I wouldn’t mind picking up the traction arms and subframe bushings. Check their upper control arms, strangely they appear like SPLs newest version. All of course with an upcharge of at 30% and probably at least 60 days wait period for that true JDM baller status.
Last edited by Infamous_Z; 08-20-2018 at 07:52 AM.
any explain why the need of zpeed undershroud accessories to install v3? I don't have any vehicles with lower shields and no issues with flimsy or flapping. Anyone help a brother out?
any explain why the need of zpeed undershroud accessories to install v3? I don't have any vehicles with lower shields and no issues with flimsy or flapping. Anyone help a brother out?
The bumper is heavy and the undershroud helps mount the bumper and control airflow around the front of the car. You can probably run without it, but risk tearing up a very expensive bumper cover.
well not flexing but I own a bodyshop so not that worried about repair cost if needed. Maybe what I need to do for the community and my own curiosity is order one in from Nissan and test fit/drive it
Just hate in my Z1 cart is an additional $700 in cost to run this bumper
well not flexing but I own a bodyshop so not that worried about repair cost if needed. Maybe what I need to do for the community and my own curiosity is order one in from Nissan and test fit/drive it
Just hate in my Z1 cart is an additional $700 in cost to run this bumper
It is definitely not flexing to own a body shop that doesn't understand the purpose of a body panel.
any explain why the need of zpeed undershroud accessories to install v3? I don't have any vehicles with lower shields and no issues with flimsy or flapping. Anyone help a brother out?
I wouldn't suggest not running it. The lower shroud keeps it where it should stay in place and on freeway trips it keeps the bottom from flopping about and flexing where it shouldn't near the top. I did not buy an aftermarket shroud, I made my own front blank extension out of fiberglass and attached it to the OEM one. I also created mounting hardware out of aluminum stock. Too much flex and it tends to crack where it mounts to the front fenders where the bumper material becomes very thin. I sold the one I cracked and replaced it with another one before the prices went parabolic. The bumper isn't made of the same material as the regular bumper. It is far less forgiving if it flexes.
Last edited by mr. sparco; 10-26-2021 at 04:37 PM.
08-20-2018, 07:47 AM
