Recommendations on a cheap harness bar/harnesses?
I'm looking to get a relatively cheap harness bar, just so I can attach harnesses to it. It doesn't have to be special or anything, as long as it works.
Do you guys recommend any brands? Appreciate it! Also before people start saying off-topic stuff like "why do you need it for street use, stick with regular seat belts" etc, that's not what I was asking, please stick to the topic. Thanks guys! :) |
cheap is relative... how much you looking to spend?
From what i seen sparco and some other bars go for around 400-500 brand new. Also, I wouldnt "cheap" out on this part since secure harness belts to and it does hold you in place. Just my 2 cents. |
Just order a Kirk bolt in roll bar, or stick to stock belts
|
I would go with sparco. I have no complaints and it was relatively easy to install.
|
If you want a roll bar I'd go with a Kirk. If you want a harness bar I personally like the look of the Enjuku harness bar.
|
Originally Posted by ksuberk54
(Post 10420212)
If you want a roll bar I'd go with a Kirk. If you want a harness bar I personally like the look of the Enjuku harness bar.
|
If you want camlock and only care about an SFI rating you're looking at roughly $150-$180 for a 5-pt from G-Force, Racequip, Pyrotect and some others. A little more if you want an FIA sticker but they are all pretty much in the same arena price wise.
Keep in mind most all current literature Ive read recommends using 6-pt over 5-pt. But if you go harness bar that is the least of your worries. |
Originally Posted by guitman32
(Post 10421445)
If you want camlock and only care about an SFI rating you're looking at roughly $150-$180 for a 5-pt from G-Force, Racequip, Pyrotect and some others. A little more if you want an FIA sticker but they are all pretty much in the same arena price wise.
Keep in mind most all current literature Ive read recommends using 6-pt over 5-pt. But if you go harness bar that is the least of your worries. |
My rjs camlock harnesses were only like 135 a piece at summit racing, they are a small company, but make quality stuff.
|
a harness bar is like $300-400 new, a kirk rollbar can be had for 5. Sure it's more labor intensive, but if you're a diy kinda guy, i would go with a kirk. That's what I got.
g-force 6pt is $150 pretty much everywhere........ or look for expired ones on eBay for $60-$70 shipped. I don't think HPDE or AutoX care if your harness is expired...... |
Originally Posted by Rubidium
(Post 10420886)
Good luck getting a hold of the Enjuku racing bar :(
|
Get BCR harness bar. Contact me for pics. Real stout customade
|
|
All times are GMT -8. The time now is 06:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands