This has worked well in the Wheels section so we might as well have one for the Exterior section as well.
You can ask for help identifying the following: -Front lip -Rear lip -Sideskirts -Spoiler/wing -Full Bodykit -Fenders -Misc, other parts.. Note: similar threads will be merged with this one to reduce clutter and help with referencing. |
|
Originally Posted by AdvanZ33
(Post 10363032)
Stock...
Originally Posted by carlboudreau
(Post 10363049)
oem trunk?
Originally Posted by AdvanZ33
(Post 10363051)
|
The sammich type.
|
Stock...proportions look too small,right?
Look at a Blitz design.Just right. |
You'll find your answer here
|
What bumper is this?
Anybody have more info on the car or what bumper it is?
http://thecharisculture.com/ss-wpb-show/ http://www.thecharisculture.com/Even...IMG_517108.jpg http://www.thecharisculture.com/Even...IMG_516406.jpg http://www.thecharisculture.com/Even...MG_2621011.jpg |
An ugly one!
|
not just an ugly one..... a FUGLY one
|
INGS+1 long nose I believe.
|
A longer nose has potential to look great, but this isn't it
|
Looks like a catfish.
|
Seen many bumpers on a 350Z, never seen this one
|
Originally Posted by blue350zed
(Post 10381387)
INGS+1 long nose I believe.
Cant say its not a clean set up though. Theres not many long nose Z kits, this is probably the only I think looks good next to Mastergrade. Maybe Iv seen too many low budget kits... |
u actually want that? u better have other mods to back up a bumper that insane lol
|
That is one ugly ass bumper that totally ruins the lines of the car, it makes it look like an Anteater. Its far too long and makes it look like a totally different car, and not for the better. I couldn't see this lasting long whilst negotiating a few speed bumps.
The wheels are about the only thing I'd keep on this shed. |
Lol I actually like the front bumper. But must have race car parts to support this lifestyle.
|
+1 Harder front to pull off but I do like it.
Rare and so tired of seeing V2s. Saw a local selling an authentic one for dirt cheap last year. It reminds me of a hand held vacuum. lol |
Originally Posted by samsniss350z
(Post 10381795)
That is one ugly ass bumper that totally ruins the lines of the car, it makes it look like an Anteater. Its far too long and makes it look like a totally different car, and not for the better. I couldn't see this lasting long whilst negotiating a few speed bumps.
Originally Posted by mr. sparco
(Post 10381878)
+1 Harder front to pull off but I do like it.
Rare and so tired of seeing V2s. Saw a local selling an authentic one for dirt cheap last year. It reminds me of a hand held vacuum. lol |
Interesting one for sure...
Perhaps an eqaully extended rearward piece would balance out the overall appearance. Then, the fenders need to be equally extended outward, then... Leaving it with the opening comment... Interesting |
INGS makes an extended rear that's similar to the NISMO to complement the front as well. Looks pretty good once all together. INGS is top quality and has been around forever too. Another long-nose option is the Voltex. I've got the Voltex sides and rear, but I'm afraid to put a longer nose than I already have with the Chargespeed. I'd love to have it, think it looks great, but speed bumps and driveways are more of an issue with it.
|
that style long nose bumper would only work on a car with a really low body profile and large fenders like them f1 type cars.
|
Please use the reference thread that I made:
https://my350z.com/forum/exterior-an...ce-thread.html It is in that thread and as stated it is an Ings+1 |
Hideous but as long as you like it and you're cool with you rear bumper hanging out of every parking spot by 2-3 feet then go for it.
|
Any Cowl Hoods?
I'm looking for a cowl hood because I'll need one in order to run the NWP engineering TB. I've already hade to cut out some of the under skeleton of the hood since I've got the V+ on top of a 1/2" spacer. And when I put the NWP TB on, it hits the hood pretty good in a place I can't cut out.
I've seen the still cowl hood, but does anybody know of a different one? Or is the stillen my only option for more clearance under the hood? |
Maybe a HR hood will work?
|
But I don't think it will because it's raised in the middle. I'm needed more room towards back where the TB is.
|
There was a cf one that I can't remember the name of, it started with a k or o though. Sorry if I could remember I'd hunt it down for you.
|
can anyone help identify this bumper?
1 Attachment(s)
I ran across this picture on Facebook but the post got deleted before I could ask what it was. I was able to snag a screenshot however. I would appreciatethe help. Also I'm sorry if I posted this in the wrong area
|
Ams gt I think
http://www.ebay.com/itm/2003-2008-Nissan-350Z-AMS-GT-VIS-Front-Bumper-/281321393755?_trksid=p2054897.l4275 Or cheaper: http://www.duraflexbodykits.com/2003...-p-482129.html |
ams gt vis sells it for 640 and duraflex sells it for 250 i believe, i have the vis version and love the way it looks
|
Which side add-ons are these? Veilside?
http://images.craigslist.org/00l0l_4...5Z_600x450.jpg
Thinking about buying a set of these. Found a used set, which I haven't yet seen in-person, as well as these new ones: http://www.ilovebodykits.com/product...FSJqOgodn3QAZw Not thrilled with this vendor, though. Looks like one of "those" sites, kind of Like JM Auto Racing, and I'm not sure I want to send them my payment info, if the used ones don't pan out. Any other vendors sell these? Thanks in advance for your assistance. |
Veilside, I should post up my urethane reps for sale.
|
Shoot me a PM.
|
I was going to buy this bumper BUT its FiberGlass and Plastic. So it'll break easy, wished it was PolyUrethane :(
|
Weird thing is... that image there is my car's old setup years ago. My buddy also showed me few pics of my car floating around Ebay, showing those sides add-ons.. WTF? lol.
Yes, those are Veilside V1 add-ons (authentic if I may add lol) They sit pretty low and they hit the speedbumps very often. Go for Ebay ones IMO. |
350z Spoiler
1 Attachment(s)
Anyone happen to know what that spoiler is called?
|
Looks like a blitz spoiler
|
Its to short on the sides to be blitz
|
Yeah it's definitely to short on the sides to be blitz...dang if anyone knows though please let me know. I really like how it looks. Thanks.
|
Moved...
|
I think I've found out what it is. It might be ... the Data system Illusion Spoiler for the 350sz. If this isn't it. Let me know asap but for now I think I'll be settling for that spoiler because it seems most similar.
|
It is a Data System but, to my knowledge, they have been discontinued for some time.
|
I was on the hunt for a "duckbill" spoiler for a while, went with the Motorsports Lemans. It's pretty similar to the data systems but sits more flush on the rear lid.
http://origincache-ash.fbcdn.net/926...89813652_n.jpg |
Name of bodykit???
1 Attachment(s)
What's the name of this bodykit ??
|
Ings+ LX, or a rep of it.
|
Ings+ and it is a lip kit, not a bodykit.
|
You're right - no sides.
|
Originally Posted by dcains
(Post 10393494)
Ings+ LX
:werd: |
Thanks guys !!!
|
All times are GMT -8. The time now is 06:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands