Riteonjon's exterior build - photos inside
 

Attachment 391281
During install
Attachment 391282
Single vent mod on the chargespeed replica
Attachment 391283

How was the fitment? What brand of rep did you go with?

Riteonjon's exterior build - photos inside
 

Fitment is 85% -90% good, passes my threshold of acceptance (I have very high standards)

VIS REPLICA

That's good to hear .... So give me the 10% to 15% fitment fail reasons if you can? Wanna see what I am gonna run into?

Riteonjon's exterior build - photos inside
 

The lines along the taillight fit nicely, trunk to bumper has a slightly larger gap then stick. Left side where rear quarter panel and new bumper meets doesn't make a perfect circle, but if that's all, I'm okay with it.

Used CS replica $285
Install/prep/paint/modify to install lights and plates $1000

The satisfaction of having the best rear bumper for the Z, priceless!

Riteonjon's exterior build - photos inside
 

Looky what just came in today!
275/35/19 on 10.5
245/35/19 on 9.5
19" VMR flow form on 350z
&
Tanabe Sustec Pro Comfort Series Coilivers
Attachment 391046
Attachment 391047
Before
Attachment 391048

After
Attachment 391049

Attachment 391050
Attachment 391051
Attachment 391052
Coils will go on Saturday!

Looking good, ROJ!!!

Riteonjon's exterior build - photos inside
 

The Mic. I've read somewhere you're from the Bay Area, me too!

Yep, San Jose/Campbell. But you're in San Diego now? What part of the Bay you from?

Hey im from the bay too. Who painted your bumper? I'm looking to get mine painted soon. I work on Moffett Field so I'm always in the South Bay.

Riteonjon's exterior build - photos inside
 

I went to kee's autobody, in Concord. They did an okay job.
I'm from SD now live in Walnut creek!

nice rims! loving the look. did you do the coil overs without a lift? how bad was it to do with a jack?

Riteonjon's exterior build - photos inside
 

Thanks Mikey, I love the look too! As a designer by trade, I'm putting lots of thought into my work without having to sacrifice too much loot &

I'm assuming you have a Yamaha? Sick...I have a ZX6R.

Here in the Bay Area, million dollar homes are the avg, I'm an apt. Dweller, therefore I'll be going to a shop where you can use their lifts/tools etc. it'll be installed this Saturday. So I can't answer you on difficultly level without the lift cuz I'll be using one!

EDIT: haha u live in the Bay Area too! I'm going to Lift in Fremont. $45/hr, why a steal!

yah I had a track R6 and a street R1 and my wife had a street R6. we sold all 3 to buy our home. were in the south bay. I think I'm near Mic I'm at the 101/85 area.
https://cimg5.ibsrv.net/gimg/my350z....de689e5f82.jpg

Riteonjon's exterior build - photos inside
 

Before coils
Attachment 390920

After coils
Attachment 390921
Attachment 390922
Tanabe pro s-OC
Rear maxed out at 1.5, front at 1.25 with still .5" room to lower.
Attachment 390923

Assessment:
I definitely feel the road more, haven't had a chance for any spirited driving, but definitely feels lower. I wish the rear could go another .5", but it's maxed. Front is perfect.

NEXT ON THE DOCKET:
Paint door handles (I hate the silver)
Light coat of nightshade on rear taillights with clear coat
Carbon signal CF duck wing
chargespeed bottom line

looking good! i think you should add tint to that list.

Riteonjon's exterior build - photos inside
 

I like the clear look, always have. It's clean. I'm a minimalist to the extreme!

Riteonjon's exterior build - photos inside
 

Attachment 390688

Attachment 390689

Attachment 390690
New shots using Nikon dslr

nice. i like you headlights tinted or painted?

Love it! Dont tint it i also like the clean look fishbowl. Black without tint also is ��