Procharger Belt Issues? Here's a fix: AAM Supercharger Brace
 

The ATI Procharger supercharger was one of the earliest forced induction kits available for the Nissan 350Z and Infiniti G35. Over the last couple of years we've encountered a minor, but consistent, flaw in the design of the ATI Procharger unit. When the pulleys are upgraded, additional stress is placed on the supercharger’s main bracket, causing it to flex. The angle of this flex causes the main belt to shift on the cog pulley under load. The end result of these actions is more rapid wear of the supercharger main belt, premature wear on the kits jackshaft assembly, and a loss of supercharger power and efficiency.

The AAM Competition Supercharger Flex Brace is the solution to this problem. Preliminary testing has show the AAM Comp Supercharger Flex Brace significantly reduces this flex and helps maintain belt longevity and supercharger power output. Constructed from the highest quality billet aluminum, the AAM Competition Supercharger Flex Brace can be used with Nissan 350Z and Infiniti G35 vehicles equipped with an ATI Procharger unit.

Note: A properly functioning jackshaft bearing greatly increases the effectiveness of the AAM Supercharger Brace. We will be working with Procharger to provide the best possible pricing for new jackshaft assemblies for those whose bearings have prematurely worn or those who have old units which are in need of fresh components.

For further information and pricing, feel free to give us a call at the shop, PM me or e-mail me at ClintonM@alteredatmosphere.com or Sales@alteredatmosphere.com

Recommended install time: 3 hours

In-Stock

http://i221.photobucket.com/albums/d...rBraceMain.jpg

http://i221.photobucket.com/albums/d...erBracket3.jpg

http://i221.photobucket.com/albums/d...erBracket4.jpg

BEFORE BRACE:

http://i221.photobucket.com/albums/d...h_MVI_2413.jpg

WITH THE AAM BRACE

http://i221.photobucket.com/albums/d...h_MVI_6426.jpg

wow nice work had the problem with my kit i made my own back in the day good work AAM:thumbup:

Very nice work and when i was at the meet they do have a sweet cnc machine.

woah! thats come deflection on the stock plate!! i cant imagine not having some sort of brace. Is procharger even aware of this problem?

I used the Vortech used wide cogged belts.

I wish you had produced this years ago.. Could have saved me so much $$$$$$$...

PM me special pricing :D

Hello.... PM special price pls.. I sent pm etc..

Just purchased.. Ill post my review soon.. :D

please do^

Should be done by next wk.. Waiting on procharger to send my sc back.. Just wanted to change out the bearings and input shaft..

Update: Procharger should be back tmrw... Ill install and post the review most likely tmrw night.. :D

+1 i watched the video this afternoon from AAM and i knew it would flex some but holy****it moved more then what the engine does

So far i ran into some difficulties.. With no instructions/wrong bolt length and missing bolts.. Trying to work them out with/ AAM will keep u posted..

Looks like after some pre install bolting up.. This is going to be harder than anticipated(may have to pull the entire SC off)... AAM is going to overnight the right bolts hopefully and maybe email me good instructions.. :D

http://i40.photobucket.com/albums/e2...INSTALL007.jpg

http://i40.photobucket.com/albums/e2...INSTALL005.jpg

http://i40.photobucket.com/albums/e2...INSTALL003.jpg

http://i40.photobucket.com/albums/e2...INSTALL002.jpg

Good luck man.

wow, those before and after videos are shocking. what a terrible initial design!! hopefully this will fix your belt issues Jay!

Thanks fellas.. I hope it fixes my issues too.. Hopefully Ill have it installed by the end of the week and go boost crazy, not belt crazy for once.. :D

update?

AAM has already sent me two sets of bolts overnighted, (one set was the wrong length so im waiting on another set).. So I should be getting them tomorrow overnighted with instructions.. So far AAM has been really good with customer service and trying to make the mistake on bolts right... :cool:

so are you selling the car or not? im so confused. :dunno:

nice AAM customer service FTW!!!!!!

Honestly its on sale sure, is it going to sell............ :dunno: And lately i cant ssssay ill be able to part ways with this car.. I think I love this car wayyyyyyyy too much..