Vortech InterCooler UpGrade with Pic's
 

Installed a 4" x 12" x 24" core Intercooler rated @ 1200 CFM behind aluminum crash bar. Also new Intake and Grill.....

nice, finally some new upgrades for you!

i'm sure your iat's will love you and you will probably gain some power from decreased pressure drop across the larger core.

Hey man, this isn't the intercooler that comes with the tuner kit is it? If not, what make and where did you find this ic at?

Looks good. Like how you mounted the tranny cooler on the crash bar, and added holes underneath to let air into the intercooler.

Nice job and it is brilliant on how you notched out the back side of the crash bar around the intercooler.

Very nice. Any chance I could get that part number for the K&N filter?

Looks great! Gives me something to think about doing myself over the winter.

nice man..where did u get the intercooler from?

Part RP-4630 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 5.5 in (140 mm)
Flange Inside Diameter: 3.5 in (89 mm)
Flange Length: 1.25 in (32 mm)
Flange Type: Centered
Height: 6.5 in (165 mm)
Top Outside Diameter: 4.5 in (114 mm)
Top Style: Carbon Fiber
Top Material/Finish: None
Filter Material: Cotton Gauze
Filter Re-Oiling Amount: 1.15 oz (34 ml)
Weight: 1.3 lb (0.6 kg)
Product Box Length: 6.38 in (162 mm)
Product Box Width: 6.38 in (162 mm)
Product Box Height: 11 in (279 mm)

That's the PS Cooler........

Thanks Everyone

Thank you..

Did the butt dyno notice a difference? Do you plan to have it dyno'ed and did you get a baseline dyno?

I've not driven the car yet... I've done all the Tuning on the Car my self, and I doubt it will need retuning. Will take it for a test drive soon and to the Strip when it gets cooler. the DragStrip is My Dyno, Best 11.85 ET @ Best 118.67 MPH before Intercooler upgrade.

Tim, did you ever get that email i sent you about my turbo setup? you pm'ed me and i emailed you back instead of Pm'ing since it's easier for me. Hope you got it.

Last email I got was July15, with 0ne pic of your turbo, looks nice, what to see how you do @ the Strip.........

Tim

Maybe a stupid question but did u fab up ur own piping for the intercooler?

Modified stock vortech 2-1/2" pipe, cut to fit and flared the ends

Ok thx