MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   Forced Induction (https://my350z.com/forum/forced-induction-182/)
-   -   Help!! My SC'd Z is cutting out. (https://my350z.com/forum/forced-induction/525680-help-my-scd-z-is-cutting-out.html)

adittus Jun 7, 2011 07:55 AM

Help!! My SC'd Z is cutting out.
 
So i was driving my Z with the new Stillen SC i put on it for about 2 months. It ran like a champ. Then Sunday I was running numerous errands and at a stop light it decided it didnt want to take off anymore. It would drive but as soon as i would give it gas it would just lag out and sputter with a kind of backfire sound. I made it to a parking lot where i let it cool. It was about 92 out that day and i had been driving it hard for like 2 hours. I drove it home but at very low rpm's. When i kicked it down it would lag and sputter. I let it sit overnight and now it runs perfectly fine again. Any suggestions?????

P.S. The temp guage remained in the middle like it had all day.

MUZZY Jun 7, 2011 08:53 AM

your R-tarded, 2hr driving it hard in a hot day,

Next time check stuff for leaks, oil quality, clamps tight? brofre you drive it again.

djamps Jun 7, 2011 09:23 AM

You may have melted your cats. Get it to whoever installed it and have it inspected. Avoid driving it if possible, your engine could go pop any second now, if it hasn't already.

adittus Jun 7, 2011 09:24 AM

Well there arent any leaks and all hose clamps are good and just had fluids changed when i put the SC on. So are you saying you cant drive a Z with a supercharger for more than an hour on a hot day? It wasnt like i was racing. Just having some fun in the streets.

adittus Jun 7, 2011 09:27 AM

DJamps...I got it in my garage and called the installer over. He hooked up the computer and it didnt give any codes at all. He inspected everything and it was all good to go. I drove it to work this morning and its running perfect again without any noises or hiccups. Just trying to figure out what would have caused this. The temp guage was in normal range.

dikspiel Jun 7, 2011 10:22 AM

Maybe you should consider having it retuned,

adittus Jun 7, 2011 11:35 AM

The Stage 3 Stillen computer is not tuneable. From what i understand.

djamps Jun 7, 2011 11:46 AM

Well that's the same way my boy's vortech G behaved (intermittent as well) when his cats started to go. Eventually they clogged and his engine blew. Just sayin.

psychoballistic Jun 7, 2011 11:52 AM

I have heard of the cats going bad as well...

Have you checked your plugs yet also? Sometimes you can get alot of information from the plugs, how they look, is there oil, are they burned up, is a tip missing, etc... Start with the small things to check first.

adittus Jun 7, 2011 11:54 AM

Yeah Djamps. I appreciate the input. I am going to look into that further. Especially since now when i drove it at lunch and got on it, to see how it acted, it stutters at quick acceleration. Damn!! Hope i can pinpoint this issue.

adittus Jun 7, 2011 11:57 AM

Thanks psychoballistic, Im going to pull them out tonight and look and probably just replace them.

k6750gsxr Jun 7, 2011 12:00 PM

What year z ? Is the old stilled kit or the new one with vortech blower ?


Previous post about cats is plausible for sure. If your running stock exhaust the cats could be over heating enough to crack if your egt's are getting high. When the guts crack and come out the can clog if no where to go.

Also you could have had a injector hanging or malfunctioning. If its the older stilled you have that added injector right ? If a car is tuned based on additional fuel being added you could have leaned out if it was not working properly.

Do you have a egt or a/f gauge ?

adittus Jun 7, 2011 12:09 PM

gsxr,

Its an 06 and yes it is the older stillen with the 7th injector. However, Im running Greddy EVO 2 exhausts which are huge! So im definitally not inhibiting exhaust. I actually was told that im not creating enough backpressure with those for the SC to work at its maximum. The only added guage is a psi guage and an extra oil pressure. No air to fuel or egt.

psychoballistic Jun 7, 2011 12:14 PM

Get an A/F for sure asap... Especially if your leaning out, you will want to know... Any time there is a leniency in boost, thats where big problems like "BOOM!" can happen.

Quick thought, if you have Cats still, and your cats are the issue, you should be able to see the effects on any OBDII computer for the pre and post cat bank sensors. Just one other thought to prevent having to possibly pull the cats un-necessarily.

superchargedg Jun 7, 2011 12:14 PM

Well its kinda hard to do a diag over the internet but i would guess the cats are dying.I had the stillen stage 4 for almost 4 years but got lucky and never had a problem like this.

adittus Jun 7, 2011 12:47 PM

So if its heat related. What if you lived in Southern texas or arizona where it gets 110+ frequently and you were stuck in traffic on the interstate. Would you fry your cats repeatedly? Im not trying to be a smart-ass on this whatsover. Just trying to figure out the heat affect on SC'd cars.

djamps Jun 7, 2011 01:24 PM

Any F/I setup with cats (especially stock cats or 'HFC') is prone to cat failure.

ADMAN Jun 7, 2011 02:19 PM

Nothing to add yet...

superchargedg Jun 7, 2011 02:42 PM


Originally Posted by adittus (Post 9188947)
So if its heat related. What if you lived in Southern texas or arizona where it gets 110+ frequently and you were stuck in traffic on the interstate. Would you fry your cats repeatedly? Im not trying to be a smart-ass on this whatsover. Just trying to figure out the heat affect on SC'd cars.

Sorry bro as i have a lot of exp with the stillen and have given a ton of advice and info i have never heard of this before.I live in the mid-a and we do get 100 plus here once in awhile plus tons of humididy....i still never exp something like this.I wish i had something to help you out.

ESP350Z Jun 8, 2011 12:15 AM

+ 1 to checking the plugs. Have you ever dynod the car with a wideband, just curious


All times are GMT -8. The time now is 04:15 AM.


© 2026 MH Sub I, LLC dba Internet Brands