When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
$3500
GTM stage 2 TT Kit for de
custom manifold these will not crack paid 2500 for them. made by matt at cj motorsports
GTM 3" down pipes
custom 3in y pipe
GTM tial external waste gate set up (Open dumps) v band removed the 4 bolt flange
Uprev tune
CJM return fuel set up (fuel pump hanger parts only)
All vacuum fitting and T's etc.... (upgraded to Aeroquip and brass T's)
All AN fitting and hoses for oil and coolant lines (Upgraded to Aeroquip hose and fitting)
in color install guide.
comes with the treadstone ic. that is what the pipeing set up for. if u want the stock gtm ic we can work some thing out would have to have driver side ic pipe remade.
made 450whp at 8.5 psi
made 636 whp at 19psi
i maintain my car extremely well. Its been 100% reliable from day one. I have no know problems. Hal at dynosty has tuned the car. has less then 7000 miles no shaft play.
Last edited by joshua350z6841; 10-23-2017 at 03:37 PM.
Reason: price
Free bump and 2 questions:
Do you have the short connection pipes to convert over to enclosed wastegate dumps?
You are the only person I've seen thus far running the Ultra Racing rear brace, did you notice a difference in that one vs the stock one?
Free bump and 2 questions:
Do you have the short connection pipes to convert over to enclosed wastegate dumps?
You are the only person I've seen thus far running the Ultra Racing rear brace, did you notice a difference in that one vs the stock one?
i do not have to connector to make it enclosed waste gates. and i replaced all the bushing at the same time with spl bushings so yes there was a difference but hard to say from what part.