C-2 Procharger Belts and Bearings
08-06-2008, 10:41 AM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: LA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
C-2 Procharger Belts and Bearings
I have found a place to get the 2 belts for the C-2 Procharger for $33 and $28 a piece as well as the bearings to rebuild the pulleys that are located in the front bracket. Search those part numbers in google and you will find them.
(Quatity)
(1) 8808MGT30 Front Belt
(1) 5608MGT30 Rear Belt
(2) 203vv, 62032RS, 62032RD (all the same bearing, I choose the 62032RD)
(2) 6205RD, 62052RD (all the same bearing, I choose the 62052RD)
For the small drive belt pulleys
(4) 203vv, 62032RS, 62032RD (I choose the 62032RD)
(2) 6003LB, 6003RS or 6003RD (I choose the 6003RD)
RS means it has a standard seal on the side.
RD means it has a extremly light contact seal on the side.
LB means there is no seal contact on the sides.
They will both work just fine and can be ordered from many bearing supply houses.
Just an FYI if you are going to DIY
(Quatity)
(1) 8808MGT30 Front Belt
(1) 5608MGT30 Rear Belt
(2) 203vv, 62032RS, 62032RD (all the same bearing, I choose the 62032RD)
(2) 6205RD, 62052RD (all the same bearing, I choose the 62052RD)
For the small drive belt pulleys
(4) 203vv, 62032RS, 62032RD (I choose the 62032RD)
(2) 6003LB, 6003RS or 6003RD (I choose the 6003RD)
RS means it has a standard seal on the side.
RD means it has a extremly light contact seal on the side.
LB means there is no seal contact on the sides.
They will both work just fine and can be ordered from many bearing supply houses.
Just an FYI if you are going to DIY
Last edited by masterbunta; 08-07-2008 at 12:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
