Turbonetics Single Turbo Kit on an 04 350z with 50k+ miles
#1
Registered User
Thread Starter
Join Date: Oct 2010
Location: Oklahoma
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Turbonetics Single Turbo Kit on an 04 350z with 50k+ miles
As the title says, do you guys think its safe to do? Or will I just blow my motor up as soon as I do it? Let me know.
#4
New Member
iTrader: (1)
Join Date: Aug 2009
Location: Virginia
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
lol please do not go with the Turbonetics kit on your Z it truly is a terrible choice. However to answer your question, boosting a 50k Z will not blow it up. A proper installation and ECU tune is the biggest factor in blowing up your motor.
#6
Registered User
iTrader: (15)
garbage for quality, and very outdated kit..much much better options...
the kits dont hold up very well, pipes cracking etc. turbo's are garbage and blow seals all the time, the t-netics flash is garbage so it would require a different ems to tune properly...Just a very bad choice..
DO RESEARCH
u obviously dont know much so start searching
the kits dont hold up very well, pipes cracking etc. turbo's are garbage and blow seals all the time, the t-netics flash is garbage so it would require a different ems to tune properly...Just a very bad choice..
DO RESEARCH
u obviously dont know much so start searching
Trending Topics
#15
New Member
iTrader: (1)
Join Date: Sep 2006
Location: Northern Va
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
And again miles arent that big of a deal its luck, chance, etc... however a great install and tune makes all the difference.
Anyway man if your serious hit up intensepower.com grab the powerlabs then hit up pfsupercars.com and call Ray. good luck and happy boosting
#18
Registered User
Join Date: Jan 2017
Location: san antonio
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
garbage for quality, and very outdated kit..much much better options...
the kits dont hold up very well, pipes cracking etc. turbo's are garbage and blow seals all the time, the t-netics flash is garbage so it would require a different ems to tune properly...Just a very bad choice..
DO RESEARCH
u obviously dont know much so start searching
the kits dont hold up very well, pipes cracking etc. turbo's are garbage and blow seals all the time, the t-netics flash is garbage so it would require a different ems to tune properly...Just a very bad choice..
DO RESEARCH
u obviously dont know much so start searching
#19
350Z-holic
iTrader: (13)
does your buddy reply to threads that are 6 years old too?
The following users liked this post:
BluestreamDE (01-27-2017)
#20
Registered User
Join Date: May 2018
Location: Puerto Rico
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
turbonetics turbo kit
Had my turbonetics kit for 6k now.
cant complain because of the price.
some issues ive had were leaks. cheap gaskets and v-band clamps which were included in the kit had to be replaced.
after installing the turbo i thought something was wrong since i was getting 0 boost. Reason was because the ecu was stock.
some lag. (first turbo build)
Im currently at 7psi.
car is much quieter compared to stock.
Keep in mind most tuners will use osiris tuner software which goes for 750+ tuner fee.
I was able to find a tuner which reflashes your ecu without osiris. ($350)
additional upgrades
forged rods
wiseco pistons
600cc injectors
act clutch
walbro fuelpump
I plan on installing a cutout, onceinstalled I plan to increase boost to 15psi.
cant complain because of the price.
some issues ive had were leaks. cheap gaskets and v-band clamps which were included in the kit had to be replaced.
after installing the turbo i thought something was wrong since i was getting 0 boost. Reason was because the ecu was stock.
some lag. (first turbo build)
Im currently at 7psi.
car is much quieter compared to stock.
Keep in mind most tuners will use osiris tuner software which goes for 750+ tuner fee.
I was able to find a tuner which reflashes your ecu without osiris. ($350)
additional upgrades
forged rods
wiseco pistons
600cc injectors
act clutch
walbro fuelpump
I plan on installing a cutout, onceinstalled I plan to increase boost to 15psi.