MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   Forced Induction (https://my350z.com/forum/forced-induction-182/)
-   -   EVERYBODY's GREDDY DYNO NUMBERS (https://my350z.com/forum/forced-induction/86351-everybodys-greddy-dyno-numbers.html)

Z33Concept Aug 5, 2004 06:03 AM
EVERYBODY's GREDDY DYNO NUMBERS
 
I WOUld like to know what the average hp dyno numbers people are getting with the Greddy Kit... Exhuast,Test pipes or cats

Sharif@Forged Aug 5, 2004 06:40 AM
Most people have addition boost and mods...so here goes.

Here are my dynos..rounded...

6psi: 360whp/340trq
9psi: 380whp/405trq (too much timing retard..should be about 415whp)

I also have the Greddy Evo2, Straight Pipes, and Walbro 255 FP

all on 91 octane fuel.

Z33Concept Aug 5, 2004 06:55 AM
Why are some many people having problems with timing whats the deal?? Keep posting yall numbers GO GO GO!! and boost levels plz

Sharif@Forged Aug 5, 2004 07:32 AM
When youi increase the boost and fuel, you need to retard timing. It's hit or miss, and clearly..I missed this time around. I have since corrected the problem, but havent returned back to the dyno just yet. I find that 6 degrees of retarding towards redline is perfect.

Bini2 Aug 5, 2004 08:07 AM
Stock Exhaust, Crawford Cats, etc...check sig
366 at 6PSI
410 at 8PSI (Nitrous N-Tercooler right before this pull...did not spray during pull)
93 octane fuel

spazpilot Aug 5, 2004 05:26 PM
1 Attachment(s)
8,8.5 and 9psi. Mods are in my sig.

Ellas1 Aug 6, 2004 01:44 PM
451rwhp 416rwtq at 10.5 psi!!!!

7 eleven Aug 6, 2004 03:44 PM
362 rwhp 330 rwtq at 5 psi

g35tt Aug 7, 2004 09:05 AM
417hp and 394torque at 8psi

accordfreak Aug 7, 2004 09:28 AM
Originally posted by gq_626
When youi increase the boost and fuel, you need to retard timing. It's hit or miss, and clearly..I missed this time around. I have since corrected the problem, but havent returned back to the dyno just yet. I find that 6 degrees of retarding towards redline is perfect.
and that is why your engine is still running unlike the several people who had blown motors on this board with NO timing pulled.... and i wonder why people keep on wondering why their motors keep on popping.

Rayden2001 Aug 7, 2004 09:33 PM
Originally posted by Ellas1
451rwhp 416rwtq at 10.5 psi!!!!
Nice numbers, thats what I want for the lowest numbers;)

ImportPartsPro Aug 8, 2004 04:23 AM
Re: EVERYBODY's GREDDY DYNO NUMBERS
 
Originally posted by Z33Concept
I WOUld like to know what the average hp dyno numbers people are getting with the Greddy Kit... Exhuast,Test pipes or cats
The 4 that we have done have been between 400 Rwhp to 420 Rwhp at 6-8 Psi with a 11.5:1 Air fuel. Most with only the kit with FMIC, exhaust, and walbro fuel pump.

Kyle
SGP Racing

fernandito7 Aug 10, 2004 03:51 PM
357 rwhp 334tq. 5psi
test pipes, stillen exhaust

350Now Aug 10, 2004 04:18 PM
Re: Re: EVERYBODY's GREDDY DYNO NUMBERS
 
Originally posted by Kyle(Houston)
The 4 that we have done have been between 400 Rwhp to 420 Rwhp at 6-8 Psi with a 11.5:1 Air fuel. Most with only the kit with FMIC, exhaust, and walbro fuel pump.

Kyle
SGP Racing
Quick Question Kyle, are you also running a FPR with return line on those set-up you have done?

My dyno are not as impressive but I know what was going wrong:

332rwhp and 319 tq at 5.6 psi.
Factory Cats and Nismo Exhaust. Also had exhaust leaks on wastegates. I plan to get a new dyno soon :)

ImportPartsPro Aug 14, 2004 04:15 AM
Re: Re: Re: EVERYBODY's GREDDY DYNO NUMBERS
 
Originally posted by 350Now
Quick Question Kyle, are you also running a FPR with return line on those set-up you have done?

My dyno are not as impressive but I know what was going wrong:

332rwhp and 319 tq at 5.6 psi.
Factory Cats and Nismo Exhaust. Also had exhaust leaks on wastegates. I plan to get a new dyno soon :)
Nope...just a walbro in tank and tuning. No return system on any of those cars.

Kyle
SGP Racing


All times are GMT -8. The time now is 01:03 PM.


© 2026 MH Sub I, LLC dba Internet Brands