MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   Intake Exhaust (https://my350z.com/forum/intake-exhaust-334/)
-   -   Dyno'd My Stock 2003 5AT Touring 350Z (https://my350z.com/forum/intake-exhaust/137976-dynod-my-stock-2003-5at-touring-350z.html)

Stailey Aug 20, 2005 10:53 AM

Dyno'd My Stock 2003 5AT Touring 350Z
 
I went with a group of my friends (around 6 of us) and we all got our cars dyno'd.
I ended up with 243 hp and 194 ft/lb tq
Temp: 96
Humidity: 58
Pressure: 33.4

My Dyno Click Here

This is my first dyno ever... and I was really suprised at the number. I really thought I would get in the high 220's low 230's... but i am dissapointed in the torque... Dyno was SAE Corrected and I am running 93 Octane...

Tell me what you think, my car is stock... and i want to learn a little more about what may have happened here... both good and bad. My next mod is the Injen Super SES Exhaust (well my first mod) and the Popcharger.

TNguyen7 Aug 20, 2005 11:25 AM

dead link

E K Aug 20, 2005 11:33 AM

What did the other cars get? The number by itself doesn't say much without a frame of reference.

Stailey Aug 20, 2005 11:35 AM

anyone wanna host the scan of the dyno sheet... i dont have anywhere to host it

and the other cars:
Stock 93 Turbo Supra: 293 hp
Stock 03 GTO: 303 hp
Lightly modded RSX-S: 179 hp
Lightly modded Civic: 142 hp

i left before the other cars got there

Way Slow Z Aug 20, 2005 01:35 PM

Dyno'd today made 236 rwhp and 227tq stock 03 Z

odarabla Aug 20, 2005 04:38 PM

My dyno Pull
 
2004 Base 6MT 350Z with injen cold air intake Dyno pulled at 255 RWHP and 250 RWTQ, and DYNO 1/4 mile Pull at 13.689 @ 103.92 mph. :icon18: I had a terrible 60 foot time of 2.43. :icon43: I need to put some better tires.


2004 Base 6MT 350Z
Injen Cold Air
5Zigen 245/35/19 front
5Zigen 275/35/19 rear
wrapped with Toyo Proxies T1-S.
15% 3M tint all around
Kenwood indash DVD with 4 Boston Acoustics 6-1/2
2 10" JL W-0 Subs.
Waiting on Apex'I AFC-2 computer

Wish list
Cower Billet Rods & pistons
and the turbonetics single turbo setup. Coming soon!!

sigsauer87 Aug 21, 2005 03:49 AM

Damn dude, that torque is really low...even in my automatic I don't have that low of torque...

davidv Aug 26, 2005 06:20 AM

Without seeing the dyno chart, critiquing the numbers is just a wild guess. That said, I believe that something is amiss. Something isn’t right. A dynameter measures torque, not horsepower. Horsepower is a mathematical interpolation of the changes in torque. Its appears that torque is too low, and horsepower is too high.

I’d toss the dyno in the trash, and start again. :(


All times are GMT -8. The time now is 06:05 AM.


© 2026 MH Sub I, LLC dba Internet Brands