Kinetix SSV clearance issues
 

Hey guys just installed my SSV, and realized the clearance between the SSV and the Strut bar is almost non-existant. I know the engine pulls in the engine bay as all engines have movement when under load, shifting, revving etc... Has anyone had any rubbing issues between the two? I have it off right now and dont want to damage either, just wanted input from the guys who reinstalled their stock strut bars over the manifold or if they went aftermarket?

it takes some adjustment, but u can get it right if u play around w/ that bolt that the strut bar has. I have about 3 or 4mm of clearance, and i only rub slightly