MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   Maintenance & Repair (https://my350z.com/forum/maintenance-and-repair-53/)
-   -   car wouldn't start (https://my350z.com/forum/maintenance-and-repair/41402-car-wouldnt-start.html)

lhapp Sep 3, 2003 07:23 AM

car wouldn't start
 
twice now I have turned the key and nothing happens! I turned the key over, reinserted and tried again . . . nothing. . .. I adjusted the steering wheel and nothing. . . adjusted the steering wheel again and it finally caught and started. . . anyone else having this problem?

yobri Sep 3, 2003 07:28 AM

Something might be interfering with the connection of the microchip inside the key housing... that is my guess.

6kLaunch Sep 3, 2003 07:34 AM

As you are aware, the clutch must be dis-engaged before the starter withh launch. Check to see that the clutch switch is activated properly.

noahbuddy Sep 3, 2003 09:45 AM

a nissan engineer said they had trouble with speed pass interfering with the chip in the key. make sure if you have a speed pass you hold it in your hand, away from the ignition when you start.

lhapp Sep 3, 2003 10:47 AM

thanks! no, I do not have a speed pass, and what exactly do you mean by clutch switch?

6kLaunch Sep 3, 2003 07:08 PM


Originally posted by lhapp
thanks! no, I do not have a speed pass, and what exactly do you mean by clutch switch?
Since the clutch must be depressed to start the car, the clutch linkage must have a switch somewhere detecting that the clutch is depressed, closing the starting circuit.

VaGentleman Sep 5, 2003 07:57 AM

Do you have any aftermarket alarm system installed?

I do and the same thing happended to me. I tried all 3 keys, but it just wouldn't start.....all guages lit up but nothing when turning the key to start the engine.

Had it towed into the dealerships and it turns out that the after-market alarm wiring to the starter relay wasn't delivering the necessary volts.

Turns out it was just one of the alarm's wire connection that needed to be re-done.

VG

lhapp Sep 5, 2003 08:46 AM

interesting. . . nope no alarm --

ZZZealous007 Dec 13, 2003 11:12 PM

So how did you fix it? My car wont turn on. The ignition key will not turn the parking brake and wheel was locked. Help!
=(

jtree007 Dec 14, 2003 07:29 PM


Originally posted by ZZZealous007
So how did you fix it? My car wont turn on. The ignition key will not turn the parking brake and wheel was locked. Help!
=(

That is just the steering lock.. just something to stop theft... Try to wiggle the wheel left and right while trying to turn the key and you should unlock the steering wheel..... for more info check you owners manual


All times are GMT -8. The time now is 08:29 AM.


© 2026 MH Sub I, LLC dba Internet Brands