Z_enthusiast

iTrader: (16)

After installing my double din and TRYING to use the relay bypass for the parking brake i realized that my temp gauge is reading (----) All fuses are good dunno what could be the problems... any ideas?

DavesZ#3

iTrader: (26)

You didn't plug all the connectors back properly.

Z_enthusiast

iTrader: (16)

hmmmm let me go try that white box... i know the guages are plugged in. i searched about this and saw threads but no problems solved

Cux350z

iTrader: (162)

temp gauge connector is up at the top. You probably did what i did when I converted my interior. I stuck the entire dash piece over the plug and didnt figure it out till it was all back together.

https://my350z.com/forum/2234839-post38.html

Look at the picture in my post here. Its the plug in the center of the picture with the foam on it.

Z_enthusiast

iTrader: (16)

double post sorry

Z_enthusiast

iTrader: (16)

no the top gauge plug was plugged in,all gauges were lit except the air temp option.
FIXED: i took the lower shifter trim peice off and theres a white box with three connectors,one white two gray. i unplugged the gray plug next to the white one while ignition was on then plugged it back in and it worked. temp is fine now. guess there was a loose connection...

winchman

"After.... TRYING to use the relay bypass for the parking brake..."

What in the world are you talking about?

DavesZ#3

iTrader: (26)

^^^ That's so you can run the DVD when the car is moving.

Z_enthusiast

iTrader: (16)

exactly!! i saw how to do it on youtube but for some reason the relay was clicking to fast (just before the radio turned on)