Problem: Front Turn Signal is OUT, rear blinks real fast (already troubleshooted)
#1
Registered User
Thread Starter
iTrader: (12)
Join Date: Dec 2008
Location: NJ
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Problem: Front Turn Signal is OUT, rear blinks real fast (already troubleshooted)
Ok, so my front driver side turn signal is out. It happened out of the blue the other day. The rear blinks very fast. I took the bulb out and replaced it. I have base headlights by the way. I replaced it with the 7440 bulb and it didnt work. I tried the other bulb in the same package, and it didnt work again. Anyone have ANY suggestions?
I even took my rear turn signal bulb and put it in the front, and it still didnt work.
I even took my rear turn signal bulb and put it in the front, and it still didnt work.
Last edited by ohfourzee; 04-18-2009 at 07:29 AM.
#4
Registered User
iTrader: (12)
How about checking the Blinker Fluid?
How to change it:
http://www.geocities.com/changeyourb...uid/index.html
Just kidding.. Good luck on finding whats causing it.
How to change it:
http://www.geocities.com/changeyourb...uid/index.html
Just kidding.. Good luck on finding whats causing it.
Trending Topics
#8
Registered User
Thread Starter
iTrader: (12)
Join Date: Dec 2008
Location: NJ
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
After reading a bunch of threads on the turn signal bulb type, 99% of them said 7440, so I went with that.
Since that didnt work, like i said before, I went and got 7443 bulbs, and they worked. That was my problem. Thanks.
Since that didnt work, like i said before, I went and got 7443 bulbs, and they worked. That was my problem. Thanks.
#9
Registered User
iTrader: (1)
Join Date: Mar 2006
Location: NYC
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
i have this same problem... i bought 2 new bulbs and tested the old bulb with a 12v source and all three of them work, but at the turnsignal harness/connector, nothing happens. i dont understand, the other front turn signal works fine as does the two rear ones, there can't possibly be a fuse for each individual signal, or is there??
#10
Hi Kids!
iTrader: (8)
Join Date: Dec 2007
Location: NoVA (South Riding)
Posts: 4,463
Likes: 0
Received 0 Likes
on
0 Posts
I'm having a similar issue here.
I installed some silver turn signals and they worked fine for a few days and then one stopped working. I replaced it with the old working bulb and its still not working. Does anyone know what fuse controls the turning signals so that I can replace it?
I installed some silver turn signals and they worked fine for a few days and then one stopped working. I replaced it with the old working bulb and its still not working. Does anyone know what fuse controls the turning signals so that I can replace it?
Thread
Thread Starter
Forum
Replies
Last Post
350Z Project X
Suspension
9
10-10-2015 09:23 AM