Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

HELP!!! Bad misfire/ intake valve seals?? 03 350z

Thread Tools
 
Search this Thread
 
Old 07-16-2018, 05:19 PM
  #1  
Texas3fiddyZ
Registered User
Thread Starter
 
Texas3fiddyZ's Avatar
 
Join Date: Jul 2018
Location: South Texas
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default HELP!!! Bad misfire/ intake valve seals?? 03 350z

Hello All,

I bought a 2003 350z 6speed that had a small miss. I thought it'd be a simply spark plug or fouled injector and im losing my mind. It would run fine for a few hundred RPM and the drop power and sound like a cammed out carbed V8 thats about to stall. Replaced valve covers due to some oil in the spark tubes thinking it was the spark tube O rings aswell as new plugs (gapped properly). Didn't fix my issue at all. Did a compression test and was within tolerance across all cylinders, no drops over 10psi. Pulled the intake manifold and every intake port is full of fresh and burnt oil sludge. So my guess is bad Intake Valve Stem Seals. I really want y'alls opinion before i start tearing the motor down. At highway speeds my eyes burned from gas fumes and it would die/not want to start sporadically. Some times i could go 15 minutes with it running perfect, and then it would misfire continuously. Any ideas? Thanks you guys.
Old 07-26-2018, 07:57 AM
  #2  
ajpasa
New Member
 
ajpasa's Avatar
 
Join Date: Jul 2018
Location: Pennsylvania
Posts: 99
Received 21 Likes on 18 Posts
Default

Hey, did you look for any leak on the manifold and hoses?
Br,
Al
Old 07-28-2018, 07:31 PM
  #3  
bealljk
350Z-holic
iTrader: (13)
 
bealljk's Avatar
 
Join Date: Apr 2010
Location: North Denver
Posts: 6,358
Received 1,282 Likes on 1,007 Posts
Default

can you upload a video? The symptoms youre describing it sounds like coil pack #4 and coil pack #6 got switched up. If you can take the plenum off and take a picture of how the coil packs are wired up will help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Karwo Z
Engine & Drivetrain
4
05-04-2016 05:50 PM
djamps
Forced Induction
32
10-11-2013 11:10 PM
lotteman
Maintenance & Repair
7
02-18-2012 05:42 PM



Quick Reply: HELP!!! Bad misfire/ intake valve seals?? 03 350z



All times are GMT -8. The time now is 04:30 PM.