2006: Camshaft position sensor OEM Nissan parts number?
Hello,
I own a 2006 350z. I drive on the highway 30 minutes to work. Car loses power for a split second 20 minutes into my drive. Cars fine when I get to work. Later that day, drive to bank. Turn off my car, walk into bank. Car won’t start when I try to leave. After calling a few people, car magically turns on. Starts kinda hard. Everything seems normal. Drive hone Next day, drive it to my garage. Starts fine. Cuts out a second after driving a few minutes. Time to fix. Now here’s the real parts; “Check engine soon” light steadily on. OBD2 scanned P0345 camshaft position sensor/ bank 2 Read read read and decide to go with oem part from Nissan dealership. Go and ask for “camshaft position sensor for driver side bank 2” After 170 dollars I head home to take the part out and install. I go to the passenger side of my hood and stick my arm to the back driver side of the engine. I pull the part out and pull out a sensor that looks straight. The one in all pictures and the dealerships diagram show a straight sensor with a elbow top. Everything seems right but when I try to connect the new oem Nissan sensor I just got from the dealership, it doesn’t fit. But in all the pictures and diagrams it looks like the right part. The Nissan parts package has the number: 23731-AL61D is that thebcorrect parts number or is it possible that there’s another sensor identical to the camshaft one near that area? Also, the one I pulled out on the driver side that was already in my car looks straight with no elbow like the passenger side one’s suppose to. im lost. Helps 😕 |
Courtesyparts.com
|
automatic or manual?
in 06 it makes a difference as to what/which sensor set up you have back there. |
Originally Posted by masterjr33
(Post 10996739)
automatic or manual?
in 06 it makes a difference as to what/which sensor set up you have back there. |
Originally Posted by travlee
(Post 10996725)
Courtesyparts.com
Congrats, that site is incorrect for the revup once again. So maybe I should just go to the dealership and ask for the same one from the passenger side that’s straight? |
you have 4 back there. 2 intake and 2 exhaust.
2 straight 2 angles. 1 of each on each side. different for intake and exhaust. do you need an intake or exhaust? |
from reading what i can its sensor A . which is the intake sensor.
call a dealer. tell them the vin. 6 speed 06 350z . need the drivers side INTAKE cam sensor. honeslty. might as well do both. I just did the exhaust one myself. I think you need the angeled for the intake. my exhaust one on the drivers side was straight. https://my350z.com/forum/2003-2009-n...or-access.html |
Originally Posted by masterjr33
(Post 10996785)
from reading what i can its sensor A . which is the intake sensor.
call a dealer. tell them the vin. 6 speed 06 350z . need the drivers side INTAKE cam sensor. honeslty. might as well do both. I just did the exhaust one myself. I think you need the angeled for the intake. my exhaust one on the drivers side was straight. https://my350z.com/forum/2003-2009-n...or-access.html I just told the dealership I needed the passenger side and it worked great I can feel the power difference and it looked like the old ones tip was chipped driving on the highway and my car died once again... only for a split second tho i wonder if any fluids bring low could cause this? My battery gauge eeemd to be at 14v and oil seems good right below 60 while driving any thoughts? |
reset the ecu
|
All times are GMT -8. The time now is 06:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands