View Poll Results: Hard to engage gears at high rpm/ shifter rattle poll
easy to shift, no high rpm rattle
198
62.66%
easy to shift, but with high rpm rattle
44
13.92%
kind of difficult to shift, no high rpm rattle
49
15.51%
kind of difficult to shift, but with high rpm rattle
25
7.91%
Voters: 316. You may not vote on this poll
how does your Z shift?
#1
New Member
Thread Starter
iTrader: (7)
Join Date: May 2002
Location: Atlanta
Posts: 4,959
Likes: 0
Received 0 Likes
on
0 Posts
how does your Z shift?
Had the shop check mine out today, but not sure if its normal or not, neither are they, as its so new and a new tranny for nissan.
When I shift, especially at higher rpm's, it seems kind of tough to get into gear. It comes out really easily then hangs in the neutral position and takes (imo) excessive force to get into gear. The tech agreed with me, but is trying to check with Nissan if its designed that way. Its not too annoying or anything, but by the way all the mags say its one of the sweetest shifters out there, it just doesn't seem right, and if I were to say, run a 1/4 mile pass, or something, it seems like it would cost a lot of time.
I sat in 3 other cars at the dealership and rowed the gears with the engine off, one felt a little stiff, like mine, the other two felt pretty smooth.
As an aside, I don't have any of the vibration in the handle like others have. If you have the rattle, does it shift smooth, and conversely, if you aren't experiencing the rattle, does it take a lot of force to shift?
When I shift, especially at higher rpm's, it seems kind of tough to get into gear. It comes out really easily then hangs in the neutral position and takes (imo) excessive force to get into gear. The tech agreed with me, but is trying to check with Nissan if its designed that way. Its not too annoying or anything, but by the way all the mags say its one of the sweetest shifters out there, it just doesn't seem right, and if I were to say, run a 1/4 mile pass, or something, it seems like it would cost a lot of time.
I sat in 3 other cars at the dealership and rowed the gears with the engine off, one felt a little stiff, like mine, the other two felt pretty smooth.
As an aside, I don't have any of the vibration in the handle like others have. If you have the rattle, does it shift smooth, and conversely, if you aren't experiencing the rattle, does it take a lot of force to shift?
#2
Registered User
I chose easy to shift/high RPM rattle, BUT my second gear shift is rather tough. I have to slam it into second to get it into the gate. It doesn't really bother me now, so I'll let it go until if/when it gets worse.
#5
Registered User
iTrader: (1)
Join Date: Jun 2002
Location: Chula Vista CA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Is there a way to adjust clucth?
I would love to engage the gear with the clutch lower to the floor. I rember my old 300ZX 92 NA had a screw that you could adjust.....any ideas if the new Z can do this too?
#6
Registered User
Join Date: Jun 2002
Location: Northern VA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by TCL
Mine shifts perfectly but 6th gear takes a little more force to engage than the others.
Mine shifts perfectly but 6th gear takes a little more force to engage than the others.
-Mike
Trending Topics
#11
Registered User
Join Date: Sep 2002
Location: Uniondale, NY
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
perfect
I've had my Z for a little over a week now and I've put 700 miles on it. At first shifting was a little tough with 1-2 being the least smooth but now its perfect and I can honestly say that with good concentration I've never had a more smooth or precise shifter. But thats with major concentration I guess it'll get a little more natural after the next 700.
#12
Registered User
Join Date: Aug 2002
Location: chicago
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
My AT is working great---full automatic is error free. While the tiptronic action is smooth, although a bit slow on the up-shift.
Just turned 1200 miles, so I'll be trying what happens at high rpm near red line.
Traffic is murder in Chicago, so AT is the only way to keep my left leg from cramping up---there are some us Z owners who are getting a little older ---- need geritol and ATs--- hey, that's life !
Just turned 1200 miles, so I'll be trying what happens at high rpm near red line.
Traffic is murder in Chicago, so AT is the only way to keep my left leg from cramping up---there are some us Z owners who are getting a little older ---- need geritol and ATs--- hey, that's life !
#14
Guest
Posts: n/a
djtonium you should kill yourself and let someone have the car that will really enjoy it!!!!!!!!!!!!!!!!!!!!!!
kidding!!!
you should sell it to someone that wants to drive the car!!!!
kidding!!!!
you should drive the car more often or kill yourself in it!!!
kidding!!!!
kidding!!!
you should sell it to someone that wants to drive the car!!!!
kidding!!!!
you should drive the car more often or kill yourself in it!!!
kidding!!!!
#16
Registered User
Join Date: Sep 2002
Location: Philadelphia
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
shifting
I'd say not much vibration (but have been below 4000 RPMs), but have had trouble at times downshifting from 5th to fourth--it just cant seem to find the slot.
#17
Charter Member #36
Join Date: May 2002
Location: Rochester, NY
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
only 350 miles but a bit tough to get into all gears - sounds encouraging that it will get better.
part of this is just adjusting 2 a new shifter I guess and hopefully it will be as nice as others say.
part of this is just adjusting 2 a new shifter I guess and hopefully it will be as nice as others say.
#18
Registered User
Join Date: May 2002
Location: Seattle (Issaquah)
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
my experience with the shifter
Ok. My most recent frame of reference is my Integra GSR shifter, which is known to be a great shifter.
1) I don't know what trannies the rest of you have been driving,but compared to my GSR the Z is stiffer and slower shifting.
2) that being said, the Z has smoothed up a LOT since I got it (now have about 2200 miles). I suspect it will continue to improve as it wears in (and I expect my own skills to improve)
3) The shift from 1-2 remains the most notchy.
4) The vibration from the shift lever is no worse than my GSR. I think people that complained about this were coming from transmission designs that were less directly connected or something (i.e., cable or linkage shifters). Honestly I haven't driven at >5000 RPM that many times, but I don't notice undue vibration. When I am shifting at >5000 I'm not just hanging out there, so I probably wouldn't notice vibration much anyway
5) I find that I can shift my Z faster when it is under hard acceleration and high revs. This is opposite to what a couple replies have said, so I dunno. Maybe I'm rev matching better on the upshifts at high rpm than I am at low rpm.
1) I don't know what trannies the rest of you have been driving,but compared to my GSR the Z is stiffer and slower shifting.
2) that being said, the Z has smoothed up a LOT since I got it (now have about 2200 miles). I suspect it will continue to improve as it wears in (and I expect my own skills to improve)
3) The shift from 1-2 remains the most notchy.
4) The vibration from the shift lever is no worse than my GSR. I think people that complained about this were coming from transmission designs that were less directly connected or something (i.e., cable or linkage shifters). Honestly I haven't driven at >5000 RPM that many times, but I don't notice undue vibration. When I am shifting at >5000 I'm not just hanging out there, so I probably wouldn't notice vibration much anyway
5) I find that I can shift my Z faster when it is under hard acceleration and high revs. This is opposite to what a couple replies have said, so I dunno. Maybe I'm rev matching better on the upshifts at high rpm than I am at low rpm.
#19
Registered User
Join Date: May 2002
Location: Cincinnati
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
My previous car was a GSR, too. I agree -- The Z is not as quick and smooth. But it IS a great gearbox. The thing is, it's more heavy-duty than the Integra, to deal with the much greater torque and hp I assume. It feels very similar to a Boxster S, but smoother IMO. It takes a certain amount of effort to move the gearshift from neutral into gear. I like it, it's solid. Someone on this board said it's "bolt action" -- I would agree.
I chose hard to shift, no vibration. 4000 miles. I don't really think it THAT hard to shift, though. But I just wouldn't call it "easy".
I chose hard to shift, no vibration. 4000 miles. I don't really think it THAT hard to shift, though. But I just wouldn't call it "easy".