PikeZ_350's PPW Build Thread
 

Well I finally decided to post a build thread....

My name is Jordan P.......I'm from Raleigh, NC.

These pics were taken on 7/28/2010 by Juan (Toby22):

http://i29.tinypic.com/9avb5g.jpg
https://farm5.static.flickr.com/4145...657e903e_b.jpg
https://farm5.static.flickr.com/4133...634feea7_b.jpg
https://farm5.static.flickr.com/4105...b5b29de5_b.jpg
https://farm5.static.flickr.com/4127...c3673d53_b.jpg
https://farm5.static.flickr.com/4090...ff5bd4ef_b.jpg
https://farm5.static.flickr.com/4085...768bfa45_b.jpg
https://farm5.static.flickr.com/4091...d88d05cf_b.jpg
https://farm5.static.flickr.com/4083...3c97ff4d_b.jpg

And a shot of my Pioneer AVIC D3:
https://i49.tinypic.com/2mbq5t.jpg

In the pics above ^^^ I was -3 in the front and -1 in the rear...decided to push them out more yesterday so now I'm -6 all the way around:

http://i749.photobucket.com/albums/x...50z/-6rear.jpg

http://i749.photobucket.com/albums/x...0z/-6rear2.jpg

http://i749.photobucket.com/albums/x...0z/-6rear3.jpg

Every little bit helps!!!


2003 Pikes Peak White Nissan 350z Enthusiast (6MT)
MODS:
-Varrstoen wheels: 19x9.5(F) 19x10.5(R) -6 all around
215/35/19 (Front) & 245/35/19 (Rear)
-Project Kics 10mm Spacers (rear)
-Project Kics 15mm spacers (front)
-Buddy Club Racing Spec coilovers
-Agency Power "y-pipe back" single exit exhaust
-Megan Racing y-pipe
-JWT Popcharger
-Pioneer AVIC-D3 head unit
-Nismo shift knob
-Bumper tuck
-Mangowalk stubby antenna
-Blacked out headlights

get 06+ taillights and headlights

and a better camera

:rolleyes:

If you don't have anything positive to say....


Looks good OP, the car is sitting nicely. What are the spring rates on your coilovers btw? and do you have any troubles rubbing at that height?

I consider him to be an expert in aftermarket modifications after seeing his highly "modified" setup.

LOL

Nice stance OP.

GTFO...I think you should worry about your own "HIGHLY MODIFIED" 350z (lol). I'm usually not an a$$hole.....:)

Haha thanks man.

This is straight off the BuddyClub website:
Z33:
Front: 14K/H180
Rear: 5K/H200
$1,980.00
2003-Up

15 Level damper adjustment

I have the rear completely maxed out...there is one more locking ring I can take off to go a little lower, but I think it's sitting well right now. I can put the front on the ground if I want, lol. But no, I don't really have any problems at all with rubbing. I rolled my rear fenders. If I didn't roll them then yeah they would definitely rub. The front doesn't really rub either.
I was thinking about selling these coilovers and getting Stance (like everyone else, lol) but I'm happy with these coils.
lol....that's exactly what I was thinking. And thanks!

Love it, lip will look great on there. :thumbup:

Thanks! I know, I can't wait to get it. Black Veilside V1 ftw!

I agree with Waizz. Nice stance you got there Pike. In for pics! :thumbup:

Thanks! I should be getting much higher quality shots sometime this week/weekend. My oldest brother is a teacher and a photographer :thumbup:

clean ass PPW man

Thanks!!

Thanks for the info. When you say your fenders are rolled, do you mean rolled as in the part that needed to be rolled is now up against the fender? Reason I'm asking this is going to be very similar to my new setup. I just got my fenders rolled and my fender isn't fully rolled against the fender just angled up at an angle. I'm wondering if this would be rolled enough to not rub.

My fenders are rolled up against the fender. If you rub the fender, it feels smooth, like it came from the factory already rolled. What is your new setup?

Looks good.

I see you have a PPW Z as well....nice choice :thumbup:

love your ride bro, in for more updates

Thanks a lot man! I'll update the thread tonight after I install my Pioneer AVIC-D3 :D

Ok gotcha, I got my fenders rolled the other week, and my guy who did it says he would roll them more if my wheels rubbed at all, from what I'm guessing its a conservative roll. I guess we'll see. I'm getting Volk GTS 19x9.5+17 and 19x10.5+18 with the same size tires as you. Then i'll install the BC racing coilovers that are just sitting on a shelf in my house looking pretty haha.

I'm looking to see just how low they will go and maybe adding spacers in the future. Not too sure yet. Been waiting 5 months or so for the Volks to come in and they should be coming in the next few weeks (hopefully). I want to see how I can deal with it being low as hell with these PA roads haha.

Mangowalk stubby antenna....i like that size. i'm gonna look into getting one of those.

yea don't listen to this kid singh kids an idiot. car looks sicck.