MY350Z.COM - Nissan 350Z and 370Z Forum Discussion - View Profile: JasonZ-YA

JasonZ-YA JasonZ-YA is offline


Visitor Messages

Showing Visitor Messages 1 to 10 of 42
  1. jon_coats
    07-21-2017 01:24 AM
    Do you still have this Frankenstein bushing press tool? I just got my Nismo control arm bushing from Japan and need to get it pressed in. I live in Houston and my brother lives in North San Antonio if we can work something out.

    Also if you have ever replaced your inner tie rods, did you get a new lock plate and spacer or just use loctite and torque it down? Thanks!
  2. Stormtroopr
    05-03-2016 08:24 AM
    I have a question for you on this post :

    thank you !
  3. Baddz
    05-15-2014 10:36 AM
    Oi Mate, I am at whits end with trying to find a good guide to dropping my compressor and condenser. I have been looking for almost 3 weeks to figure out how to remove the dang thing, All I have found are very vague hither and thither quest quotes that just wound up cutting the belt... Do you know of anyone that has done this and has either a write up with pics or just knows how to do it and would help me out? You are a mod so I get you are busy but any help would be greatly appreciated.
  4. fd3toe46
    01-30-2014 08:00 AM
    Hi Jason...I PM'd you but thought I'd ask here too. Are you still offering the bushing pressing service? Just saw last night that my bushing just ripped.
  5. crsracing19
    12-09-2013 07:17 AM
    hey Jason another question for ya to add to your inbox with the spl upper a arms is there anyway with shims or lack of shims i can pull 3 degrees of camber out of or is it truly only limited to 2.5
  6. dkgaby
    08-30-2013 07:57 AM
    Hey there,

    Quick question. The kinetics you mentioned in suspension 101 thread from are the version 2 kit or version 1?
  7. Bigalow
    01-08-2012 04:24 AM
    Hey, loco. More products for your drifting arsenal:
  8. fexplosiong
    01-05-2012 06:56 AM
    Quick question, When you replaced the bushings on the translink... did you gride down the nubs like I've seen other people do?

    I don't have access to the tools necessary to grind them down.. and was wondering if it REALLY is necessary.

    Thank you
  9. Scrodes
    12-04-2011 05:53 PM
    Hey Jason - just wanted you to see the result of all your hard work and help, thanks muchly
  10. jfern350z
    09-21-2011 12:31 AM
    hey got a question about the hks hipermax III coilovers. Basically i got them but with no instructions at all I believe i got the all the parts for it from the pic i see. Wondering if u know of a link that has actual pictures of it being installed just to make sure im putting it on right. thanks

About Me

  • About JasonZ-YA
    Z/G Owner
    San Antonio/I miss DFW, TX
    Trim Level
    Mods for drifting......tie rods, tons of wheels...yada, yada..

    man i love my dodge avenger shorty antenna!
    Mechanical Engineer
    Inventing/modding/fabbricating/building/breaking/fixing/making/pounding on things with hammer!!! Where the Fk is the BFH!! lol...
    Aerospace Engineer IV
  • Signature
    04 PPW Touring - My favorite mod is my short Dodge Avenger antenna


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 01-28-2018 09:03 PM
  • Join Date: 01-18-2006


Showing Friends 1 to 10 of 48

Social Profiles

Instant Messaging
Send an Instant Message to JasonZ-YA Using...
This Page

All times are GMT -8. The time now is 06:12 PM.

Copyright 2002 - 2017, MY350Z.COM All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.