Wrecked the Z, Parting out EVERYTHING
*06/02/2016 updated list of parts SOLD and ADDED* AGAIN TEXT ME FOR FASTEST RESPONSE! NUMBER IS BELOW!
UPDATED WHAT IS SOLD AND WHAT ISN'T, ADDING MORE PARTS AS I TAKE THEM OFF! IF YOU DON'T SEE IT, ASK ABOUT IT! I'm on here once a day or so, fastest way to reach me is text! Major items shown with ID and the entire car is pictured with my ID verification. All parts are negotiable, paypal 3% and shipping not included. small parts add a maximum of $15 to ship (unless i can drop it in an envelope then it's free) big parts I'll get a quote for you. Without farther ado: AVAILABLE: 03 taillights OEM and Aftermarket set - $110/set shipped Set of 03 headlights, just wet sanded and cleaned up. bulbs and all included. Carbon Fiber Driveshaft STRAIGHT - $100 Set of OEM 17" wheels with roller tires - $300 OBO (can arrange shipping) Black carpet (just got cleaned) - $110 shipped OEM Cloth Seats - $100/piece no rips or tears. local pickup Main Gauge cluster - $110 shipped OBO (136k on it) Triple Gauge Pod - $150 shipped OEM 03 kick panels X2 sets- $80 shipped/set Driver/Passenger regulators, no problems, works great. - $60/piece shipped My custom built rear back panel for rear 10" L7 subwoofer, sub included. $300. I am trying to pull the fiberglass box out as well. This box hit like two 12's, Look at my build thread for more info on it. Guys at Radioactive in Sanford did an AWESOME job on it. (If you are SERIOUS about this, I am in the process of extracting it out of the wreck undamaged. TEXT ME for pictures) 25MM spacers painted black to match wheels - $50 03 Complete console w/gauges, AC controls, Shifter Trim, arm rest, waterfall, storage box (x2) - $300 Freshly rebuilt 6MT transmission - $800 (you figure out shipping) Sun visors - $100/pair shipped Passenger rear backup/turn signal light - $35 shipped PENDING Driver rear backup/turn signal light - $35 shipped PENDING Drivers Airbag - $90 Steering wheel (Leather rubbed through at top) - $50 OEM Front Strut bar - $40 VQ35DE Engine, I can rebuild it if you want to pay for it. Starts and runs perfectly fine even after the wreck. PENDING LOCAL SALE Flastic complete Chaos widebody kit (will post pictures shortly) Still new in boxes. - $800 shipped SOLD: Tein Comfort Sport Coilovers with Tein EDFC System Megan Racing Tie Brace 06+ Bi-Xenon Headlights with bulbs/ballasts included Driver/Passenger side window motors. Greddy Revolution Dual Catback Exhaust - SOLD Z1 Motorsports Test Pipes with O2 bungs made GTSPEC 4 point Chassis Brace scraped but in good shape with hardware Stoptech SS brake lines full set (installed for 80 miles) Kinetix Front Camber Arms, good ball joints, good bushings SPC Rear Camber Arms/SPC Rear Toe Bolts JWT Pop Charger setup with heat shield Rear Z emblem strut tower cover Passenger airbag/airbag cover Passenger Seatbelt BBS RK 18" Wheels Transmission/clutch Cupholders/one drivers door vent VLSD capped off with 2k mile old OEM Nissan Fluid change 03 PPW Rear Bumper - PENDING SHIPPING ESTIMATE SALE Cupholders from dash and console Lots of interior and OEM parts still up for sale! I am OPEN TO TRADES AS WELL, clutches, seats, leather OEM. Let me know! The whole car is pictured with my name/site/date on top of it. Major parts listed, everything else is for sale! All interior plastics are good, rear Z emblem is good, engine still starts and runs perfectly! Shifts into gear perfectly and rear end is good as well. Has the stock VLSD in it. All brakes almost brand new, just did a full brake job on it. Hundreds of parts, ask if you don't see it listed. I promise I have it. BBS wheels already sold though, buddy got those within a day of the wreck! PM me here or text me anytime 24/7. I'm willing to ship or local pickup. 919-740-8509. All pictures below. Adding more as I get the car lifted up and pulled apart. https://cimg7.ibsrv.net/gimg/my350z....50b6b4125a.jpg https://cimg0.ibsrv.net/gimg/my350z....fd9838a8fb.jpg https://cimg2.ibsrv.net/gimg/my350z....b0a8018f32.jpg https://cimg3.ibsrv.net/gimg/my350z....df344d08c5.jpg https://cimg5.ibsrv.net/gimg/my350z....730bc2ca28.jpg https://cimg7.ibsrv.net/gimg/my350z....6821331cef.jpg https://cimg9.ibsrv.net/gimg/my350z....11df7dac94.jpg https://cimg0.ibsrv.net/gimg/my350z....da8f7ceb8f.jpg https://cimg2.ibsrv.net/gimg/my350z....f9fa779870.jpg https://cimg3.ibsrv.net/gimg/my350z....bec747fccc.jpg https://cimg4.ibsrv.net/gimg/my350z....30a0e6ea09.jpg https://cimg5.ibsrv.net/gimg/my350z....cbace8cdd5.jpg https://cimg6.ibsrv.net/gimg/my350z....e4abd3294e.jpg https://cimg7.ibsrv.net/gimg/my350z....09ab067b21.jpg https://cimg8.ibsrv.net/gimg/my350z....3fe39b2803.jpg https://cimg9.ibsrv.net/gimg/my350z....96bbb4c062.jpg https://cimg1.ibsrv.net/gimg/my350z....fe8e81de8e.jpg https://cimg2.ibsrv.net/gimg/my350z....ce6754876e.jpg |
Wow, glad you're vertical. Good luck!
|
Glad you are ok. Care to share what happened?
|
PM'd about the coilovers.
|
Driver side door vent
Not sure if your has this, but the cupholder on the dash and the cupholder insert in the center console. These are more important than the vent since i might put a gauge where the vent is anyways Shipped to 01841(they should all fit in a large flat rate box) |
How much for the exhaust shipped to 91205?
|
pics of chassis brace?
|
If exhaust deal falls through I would like a shipping quote to 98006
|
Originally Posted by Xonatron
(Post 10758251)
Glad you are ok. Care to share what happened?
|
Originally Posted by RichV
(Post 10758264)
PM'd about the coilovers.
|
Originally Posted by iideadeyeii
(Post 10758316)
Driver side door vent
Not sure if your has this, but the cupholder on the dash and the cupholder insert in the center console. These are more important than the vent since i might put a gauge where the vent is anyways Shipped to 01841(they should all fit in a large flat rate box) https://cimg2.ibsrv.net/gimg/my350z....3c4f076349.jpg |
Originally Posted by GarniZ33
(Post 10758381)
How much for the exhaust shipped to 91205?
|
^^^^^^^^^^^^^^^^^^^^^^^^
Originally Posted by Hypnolope
(Post 10758501)
If exhaust deal falls through I would like a shipping quote to 98006
|
Originally Posted by VenomGT9
(Post 10758428)
pics of chassis brace?
|
https://cimg6.ibsrv.net/gimg/my350z....545f036a0a.jpg
Couple people asking about this. Picture for everyone to see it's fine, no cracks, couple scratches. Can be pulled and shipped no problem. $50 |
ALL PM'S REPLIED TO PLEASE CALL OR TEXT ME AT MY PHONE NUMBER ABOVE TO GET A FASTER RESPONSE!!!!!!! I'm a nice person lol, I don't bite, if I don't answer just leave me a message :)
Headlights - Sale pending Transmission - Sale pending Everything else still up, lots of questions, no bites yet! |
Driver side door handle and parts to assemble it to 20155.
|
Do you have the elbow pads that go in the door panels? If so shoot me a price on those. I wish that gt brace wasn't so big I would buy that but I need it shipped and I am sure it would cost a fortune.
Would you do 60 shipped to 75024 on the intake? If so shoot me paypal I will take it. If you have those elbow pads in good shape I will buy those as well. Feel free to message me. |
Elbow Pads
If above deal falls through, Looking for arm pads on driver side.
Thanks |
Interested in the SS Lines. This can probably be dropped in a big envelope. PM me, thanks. Also the AC controller unit is it available how much?
|
All times are GMT -8. The time now is 12:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands