Winter Projects '08-'09
#21
Registered User
iTrader: (7)
Join Date: Mar 2007
Location: Michigan
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Steve - You didnt happen to buy those brembos because I let you drive my car did you? I know there is a difference but cmon I need some kind of edge at the track. Let me know if you need help with anything.
My winter projects are track rims and tires for the Z. Then also installing new brakes, stainless steel lines, and hopefully new rotors.
Of course I cant forget the 1 piece race suit, gloves, and boots for the bike. I will also prolly be helping billy with his coilovers too.
My winter projects are track rims and tires for the Z. Then also installing new brakes, stainless steel lines, and hopefully new rotors.
Of course I cant forget the 1 piece race suit, gloves, and boots for the bike. I will also prolly be helping billy with his coilovers too.
#23
Registered User
iTrader: (15)
Join Date: Apr 2005
Location: Harrison, Ohio
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Did the clutch and Flywheel a few weeks ago. So now my plans are to only drive it when it's nice out and save money for spring. I'll end up getting some better sticky tires and an exhaust.
#24
Front Brembo remanufacture
Here are before and after pics - I only had the fronts remanufactured. The rears are still in good shape (plus budget is tight).
**Before**
***After***
I'm still deciding if I should paint them to match the rears (standard Brembo gold) or paint both of them some other color. The grey isn't too bad..
Now I need brake lines, rotors, bleeders for 1 rear caliper, a bracket for a front, and some tool to hack that rear dust plate to fit the new rotor... oh yeah.. and money for all of that! lol.
**Before**
***After***
I'm still deciding if I should paint them to match the rears (standard Brembo gold) or paint both of them some other color. The grey isn't too bad..
Now I need brake lines, rotors, bleeders for 1 rear caliper, a bracket for a front, and some tool to hack that rear dust plate to fit the new rotor... oh yeah.. and money for all of that! lol.
#25
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
Coilovers would be nice.. I'll have to keep dreaming and keep saving.
The Forgelines come with a story. The super-cliff-note version is - I go to the same track as this guy...
He decided to get out of T2 after this recent incident - and someone from his crew looked me up.
The Forgelines come with a story. The super-cliff-note version is - I go to the same track as this guy...
He decided to get out of T2 after this recent incident - and someone from his crew looked me up.
Last edited by Phreakdout; 02-22-2009 at 01:27 AM.
#26
Registered User
iTrader: (7)
Join Date: Mar 2007
Location: Michigan
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
^ That is the guy steve got his new parts from.
Steve, it looks like who ever did your brakes, did a very nice job on the rebuilds. IMO i would paint them to match the rears, and besides i love the brembo gold color. Glad to see you have made a little progress on your winter projects.
Steve, it looks like who ever did your brakes, did a very nice job on the rebuilds. IMO i would paint them to match the rears, and besides i love the brembo gold color. Glad to see you have made a little progress on your winter projects.
#27
Registered User
O/k I will start off by saying hello new here just saying hello.Here is my second winter project(0-100mph) it's a 1983 porsche 944(aluminum body).I ripped out the old drive train and flooring and wiring and dash the only thing that is orig is the body and some front suspension parts.I put a built LS2 a custom built 200r4 trans along with a 9in ford rear with 468 gears and custom 3point coilover rear and ladder bars.I just installed 2 nitrous 10lbs bottles and warmers and used the 200 shot jets,I just got my dash back from a local air brush painter..........
#29
Registered User
Lol on the valve stem comment.With age comes cool looking cars that can go/sound fast.By the time I am 50 or so the porsche will be gone,and my dream(since I was knee high to a grasshopper) car will be in it's place 1933 ford 3window coupe,all steel w/40's flathead V8,$$$ but it will be sitting right next to my Z because the body lines/design and I have 2 much money invested in her.Sorry going on a rant. Thanks thekinn,my first project car was a 83 regal
Last edited by CUL8ER; 02-25-2009 at 01:43 AM.
#31
Not yet. I had a couple small home projects to deal with.. and I stocked up on oil and filters for this season. Tight budget.. just gotta wait till I have a few more $ on me to proceed.
I do still have life on my current brake setup - so I have time to milk that before I upgrade...shoot, the rotors I currently have are practically brand new! I hate to ditch them already. I suppose I could try to line up a buyer locally.
I do still have life on my current brake setup - so I have time to milk that before I upgrade...shoot, the rotors I currently have are practically brand new! I hate to ditch them already. I suppose I could try to line up a buyer locally.
#33
Registered User
iTrader: (7)
Join Date: Mar 2007
Location: Michigan
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
That is definitly something your are going to have to do unless you plan on keeping those rotors for a long time and just hanging onto the brakes. Once the brembos go onto your car you will have no choice but to get new rotors. It looks like you may already ahve a buyer too.
#35
I'm thinking of throwing a 'destroy my stupid Brembos' party and let everyone take a hammer to my long, semi-expensive, quickly failing Brembo swap project..
All of my calipers leak a little at the bleeder screw (from the bleed hole). Torquing them down to 14ft lbs now (Service manual calls for 10ft labs).. This lessened the leak to just a little fluid in the cap - but still fluid.. This is after some very light city driving.
At least one leaks from the bleeder screw thread area... Not seeing an easy answer to this one.
Meanwhile.. My car is now undriveable.. At least I tried - the budget brake swap isn't working out too well. Not sure what I'm going to do now.
All of my calipers leak a little at the bleeder screw (from the bleed hole). Torquing them down to 14ft lbs now (Service manual calls for 10ft labs).. This lessened the leak to just a little fluid in the cap - but still fluid.. This is after some very light city driving.
At least one leaks from the bleeder screw thread area... Not seeing an easy answer to this one.
Meanwhile.. My car is now undriveable.. At least I tried - the budget brake swap isn't working out too well. Not sure what I'm going to do now.
#36
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking of throwing a 'destroy my stupid Brembos' party and let everyone take a hammer to my long, semi-expensive, quickly failing Brembo swap project..
All of my calipers leak a little at the bleeder screw (from the bleed hole). Torquing them down to 14ft lbs now (Service manual calls for 10ft labs).. This lessened the leak to just a little fluid in the cap - but still fluid.. This is after some very light city driving.
At least one leaks from the bleeder screw thread area... Not seeing an easy answer to this one.
Meanwhile.. My car is now undriveable.. At least I tried - the budget brake swap isn't working out too well. Not sure what I'm going to do now.
All of my calipers leak a little at the bleeder screw (from the bleed hole). Torquing them down to 14ft lbs now (Service manual calls for 10ft labs).. This lessened the leak to just a little fluid in the cap - but still fluid.. This is after some very light city driving.
At least one leaks from the bleeder screw thread area... Not seeing an easy answer to this one.
Meanwhile.. My car is now undriveable.. At least I tried - the budget brake swap isn't working out too well. Not sure what I'm going to do now.
#37
Not that I am aware of. Someone in another thread had mentioned that, but, I thought they were kidding. I figured the heat would roast off any teflon tape used - I could be wrong though. The service manual does not specify on the diagram.
I think my next step is buying bleeders direct from the dealer - I was just hoping to not spend any more money on this project. It doesn't help when they want to charge me $56 for a 'set' of bleeder and cap.. So, multiply that by eight.. $428 for 8 screws with holes in them. Ridiculous.
I think my next step is buying bleeders direct from the dealer - I was just hoping to not spend any more money on this project. It doesn't help when they want to charge me $56 for a 'set' of bleeder and cap.. So, multiply that by eight.. $428 for 8 screws with holes in them. Ridiculous.
Last edited by thekinn; 04-13-2010 at 05:43 AM.
#38
Registered User
iTrader: (32)
Join Date: Apr 2008
Location: Ann Arbor, Michigan
Posts: 2,115
Likes: 0
Received 0 Likes
on
0 Posts
Not that I am aware of. Someone in another thread had mentioned that, but, I thought they were kidding. I figured the heat would roast off any teflon tape used - I could be wrong though. The service manual does not specify on the diagram.
I think my next step is buying bleeders direct from the dealer - I was just hoping to not spend any more money on this project. It doesn't help when they want to charge me $56 for a 'set' of bleeder and cap.. So, multiply that by eight.. $428 for 8 screws with holes in them. Ridiculous.
I think my next step is buying bleeders direct from the dealer - I was just hoping to not spend any more money on this project. It doesn't help when they want to charge me $56 for a 'set' of bleeder and cap.. So, multiply that by eight.. $428 for 8 screws with holes in them. Ridiculous.
#39
Well.. it may be those pesky bleeder screws. I just replaced two rears with the only two rear bleeders that I had from the original calipers (before rebuild) - and surprisingly no leaks. This was also the caliper that leaked at the threads.
Oakos has a set of speed bleeders that are supposed to be compatible with the 350Z calipers. I'm going to give them a try. $56 for a set of 8. Worth a try since the dealership wants $56 for 1 bleeder.
I did try to contact Brembo here in MI. One location was a rotor factory, they sent me to another number in CA - no help. I could not find a number to the headquarters in Plymouth.. sent an email though.
Thanks,
Oakos has a set of speed bleeders that are supposed to be compatible with the 350Z calipers. I'm going to give them a try. $56 for a set of 8. Worth a try since the dealership wants $56 for 1 bleeder.
I did try to contact Brembo here in MI. One location was a rotor factory, they sent me to another number in CA - no help. I could not find a number to the headquarters in Plymouth.. sent an email though.
Thanks,
#40
Also - I figured I'd mention that the speed bleeders come with a sealant applied to the threads.. sort of like the teflon idea you mentioned earlier. Hope to test them out by Friday - depends on when Oakos gets them in stock.
http://www.oakos.com/Merchant2/merch...y_Code=1065000
http://www.oakos.com/Merchant2/merch...y_Code=1065000