FS: Roja(Ray's forged 20's)
 

http://farm3.static.flickr.com/2131/...3ce8d84d_o.jpg

http://farm3.static.flickr.com/2021/...1a75a928_b.jpg

Custom(meaning only set of it's kind custom, not just an offset thats not widely available) Ray's forged 20inch Roja wheels, 1 piece. Also tires. Previously used on the Valvoline 350Z(for three shows) and for the past two months on my car. PM for more info.

didn't you just get these rims? what are you replacing them with?

how much are you looking to get????? and what the offset and 20 x ?????

I know I know...I just got them. Just like the Nismo S-tune eh? *laugh* Only reason I sold those were because i was running the 20's! Go figure.


The 20's was something I couldn't pass up. They're dope, lighter then my stock 18's, and have very nice dish. Not to mention that they're unique. But in retrospect, I think I knew I wanted to go a little more on the mild side this time, with something slightly sportier. My last car, was fairly aggresive, and I figure I'd tone it down a bit.

(Last car)
http://farm1.static.flickr.com/76/15...b23b6b24_o.jpg

I'm going to be running a small lip kit, and the 20's just won't match. I've been in love with Japan wheels for a long time, and for some reason have always been partial to SSR's. I'll most likely be getting a type C-RS in anthracite - 18's 9 1/2 and 10 1/2, with a +22 offset.


The 20's are 8 in the front, I believe with a +25 offset, and 10 in the rear, with a +27 offset. The fronts are running on 245/30/20 NEOGEN, and the rear's are on(tadaa!) 285/30/20 Michellin P2's. The offset and sizes were slightly conservative, to ensure the wheels cleared most aftermarket brakes (Valvoline Z was running 6 pot Brembos) But the lip is still damn nice, especially in the rear.

The 20's would look great with an aggresive kit. Absolutely. Or without a kit.

I'm currently asking $3500 O.B.O. It's a steal for these wheels and tires, considering it's the only one of it's kind, and forged by Ray's, with a polished lip.