What have you done for your Z today?
Registered User
It makes an unholy mess, but gets the job done.
The following users liked this post:
shaq77fan (07-28-2017)
then seal them! beforei put on the new axle back on the vette, i cleaned the tips with alcohol, and then layed on some OptiCoat. now when i wash the car, one swoop of the mf cloth and they are clean
Last edited by travlee; 07-28-2017 at 08:17 AM.
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
The following users liked this post:
CanZFan (07-28-2017)
Registered User
6 inch cawk is my fave!
iTrader: (3)
Pulled the seat belts and sold those for $20... Special note on seat belts if you ever remove them make sure they dont retractable fully because they wont come back out... Dude drove here to buy them for $100 but once removed from the car they wouldn't come back out... So sold them for $20 o well.
Guess I lost some $$$ not knowing that little tid bit of info...
2 to 4 dollars
New Member
The following users liked this post:
gringott (07-29-2017)
6 inch cawk is my fave!
iTrader: (3)
Removed all the plastic and sold that with the door panels and center console for $60
Removed the side skirts, rear bumper, muffler, some other stuff... Mickeys play house is slowly coming apart.
Registered User
Join Date: Aug 2016
Location: Pueblo West, Colorado
Posts: 439
Likes: 0
Received 31 Likes
on
27 Posts
New Member
Anything you're planning to use for your car?
6 inch cawk is my fave!
iTrader: (3)
I will probably end up using the engine cradle and the front brace... Ill keep all the suspension most likely also...
I did consider making a trailer out of the rear subframe and suspension, I do have another complete rear suspension laying around... We will see
If nobody ends up wanting this engine soon enough I have an S10 over here that wouldn't mind a little boost in performance.
This car was actually in very good shape before it was smashed from behind and sat around for 2 years. The pinch seems all were perfect untill the other day when I deformed them with my floor jack.
6 inch cawk is my fave!
iTrader: (3)
Cleaned up some stuff.. trying to take it easy today...
And even swapped out my crossover hose on my actual car... Thanks for the motivation Craig.
And even swapped out my crossover hose on my actual car... Thanks for the motivation Craig.
The following 2 users liked this post by GarniZ33:
BigBlue (08-01-2017),
SirSpeedyZ (08-03-2017)