(OEM) FS: 03 touring edition part out .
#41
front core support, the fenders, the hood, the aluminum bumper support, the brackets, a front bumper, the radiator, the a.c.condenser, the ac lines, the hood hinges, the headlights, and the passenger side mirror, the coin holder (ash tray) all interior plastic have been sold...
Most of this car is sold... It was a fruitful 3 weeks.
Most of this car is sold... It was a fruitful 3 weeks.
Last edited by dboyzalter; 08-09-2017 at 07:28 PM.
#45
Full disclosure the car these came from was nothing short of gross... Mice made a happy home in this car... I spent a lot of time cleaning these seats up... I tried to unzipp the leather from the back to gain access to the inside but was unable to get the zipper to unzip... I didn't want to ruin anything so I just left it alone...
First pic is all cleaned up...
Second picture is from before I conditioned the leather... It had signs of use on the drivers side bolster...
Thanks
#48
General & Tech Moderator
MY350Z.COM
MY350Z.COM
@ Mikey-
I'll leave it open till you pm me.
I'll leave it open till you pm me.
#49
Registered User
Were all exterior lights working on the car before you began the part out? If so I need the LR Tail Light Connector (with a few inches of wire) and the LR Side Marker Socket and Connector (with a few inches of wire). How much shipped to 23602? Thanks in advance.
The following users liked this post:
dboyzalter (09-11-2017)
The following users liked this post:
jhc (09-11-2017)
#58
General & Tech Moderator
MY350Z.COM
MY350Z.COM
And closed at OPs request. All the Best, Mike!