jdmfetish build progress ( Pictures Lots )
04-12-2017, 04:20 AM
#41
They do make quite a few things for the Z33 Platform actually. In Carbon & FRP.
http://www.uras.co.jp/Shop/html/index.php
I ordered from Nengun below, they really treated me well.
It is made to order, but I paid on March 23rd, and it was delivered in my hands 1st week of April , so about 2 weeks. I highly recommend them.
https://www.nengun.com/uras/z33-fairlady-z-gt-lip
http://www.uras.co.jp/Shop/html/index.php
I ordered from Nengun below, they really treated me well.
It is made to order, but I paid on March 23rd, and it was delivered in my hands 1st week of April , so about 2 weeks. I highly recommend them.
https://www.nengun.com/uras/z33-fairlady-z-gt-lip
05-29-2018, 09:53 AM
#42
Did some work on the car this weekend .
Had a broken rear sway bar end link bracket , so I installed a new bracket.
Had a cracked front bumper on both sides from being so LOW, so we installed the Quick Release Front Bumper brackets , now SO WAY SECURE.
While the bumper was off I installed the JDM clear reflectors.
I also installed a new set of Depo Headlights.
Did an oil change too.
Raised the front of the car 6 mm.
Had a broken rear sway bar end link bracket , so I installed a new bracket.
Had a cracked front bumper on both sides from being so LOW, so we installed the Quick Release Front Bumper brackets , now SO WAY SECURE.
While the bumper was off I installed the JDM clear reflectors.
I also installed a new set of Depo Headlights.
Did an oil change too.
Raised the front of the car 6 mm.
The following users liked this post:
rustyschopshop (07-12-2019)
07-15-2019, 04:31 AM
#46
Appreciate that ........ The Brides were good to me , they were torn and ripped on the drivers side on both upper and lower bolsters, from getting in and out of the car the last 5 years. So I figured instead of investing in a repair I could upgrade to Leather , and cut my seat + base weight in 1/2 . Plus I had a buyer for the Brides in advance . The Recaro's + BC SLD rails set up is about 1" lower than what came out. But both seats are really nice no matter how you slice it.
Thanks !
Last edited by jdmfetish; 07-15-2019 at 04:33 AM.
The following users liked this post:
rustyschopshop (07-15-2019)
The following 2 users liked this post by jdmfetish:
rustyschopshop (05-28-2020),
Zelduh (05-31-2020)
05-23-2021, 11:21 AM
#50
New Member
Oh, wow!!!
Congrats on new ride!
Hope, your z will stay in family.
Congrats on new ride!
Hope, your z will stay in family.
The following users liked this post:
jdmfetish (05-24-2021)
Thread
Thread Starter
Forum
Replies
Last Post