World Highest Horsepower Supercharged Z
#1
Registered User
Thread Starter
World Highest Horsepower Supercharged Z
Hello guys,
first sorry guys to post this late,, i should post this a year ago,
everybody knows i pushed my stock revup engine to 580whp @17 psi for two years, then pushed 19 psi and bent two rods, i'm lucky its was only bent.
i built the engine with manely pistons 11:1, manely turbo tuff rods, 272 tomei cams with springs and retainers,,,,,etc.
sold my small v2 supercharger and bought Vortech V7 YSi Billet rated 1950 cfm can support 1400hp.
i'm proud that i built and tuned my car myself, and i would like to thanks all my great friends who helped with knowledge all the way, i would like to say thanks to : Adam Tout, Tim Hampton "TimRod",Ray Rowe,Afzal Ali,Sultan Hassan and all friends who helped me in anyway.
i went into lot of drama and fabrication and belt issues but finally solved all issues and made 31.4 psi to push 779whp. i believe i can go to 950whp if i get long headers and changed the stock intake manifold
here you are some videos:
have fun
if you wanna see more please follow or add me as friend at facebook:
www.facebook.com/ahdalphoto
other mods: ATS triple carbon CLUTCH, CJM stage 3 fuel system, standalone with knock ampilfire,,,,etc.
thanks for watching and thank you for your time,
by the way i'm Vortech + ATS clutches DEALER. shoot me message for great deals.
first sorry guys to post this late,, i should post this a year ago,
everybody knows i pushed my stock revup engine to 580whp @17 psi for two years, then pushed 19 psi and bent two rods, i'm lucky its was only bent.
i built the engine with manely pistons 11:1, manely turbo tuff rods, 272 tomei cams with springs and retainers,,,,,etc.
sold my small v2 supercharger and bought Vortech V7 YSi Billet rated 1950 cfm can support 1400hp.
i'm proud that i built and tuned my car myself, and i would like to thanks all my great friends who helped with knowledge all the way, i would like to say thanks to : Adam Tout, Tim Hampton "TimRod",Ray Rowe,Afzal Ali,Sultan Hassan and all friends who helped me in anyway.
i went into lot of drama and fabrication and belt issues but finally solved all issues and made 31.4 psi to push 779whp. i believe i can go to 950whp if i get long headers and changed the stock intake manifold
here you are some videos:
have fun
if you wanna see more please follow or add me as friend at facebook:
www.facebook.com/ahdalphoto
other mods: ATS triple carbon CLUTCH, CJM stage 3 fuel system, standalone with knock ampilfire,,,,etc.
thanks for watching and thank you for your time,
by the way i'm Vortech + ATS clutches DEALER. shoot me message for great deals.
Last edited by aboodi; 05-13-2017 at 07:19 PM.
The following 8 users liked this post by aboodi:
BigBlue (05-10-2017),
BluestreamDE (05-10-2017),
gtzero (11-28-2021),
OldManZ350 (12-07-2019),
phunk2 (01-12-2018),
and 3 others liked this post.
#3
Registered User
Thread Starter
The following users liked this post:
OldManZ350 (12-07-2019)
#5
Registered User
Thread Starter
#7
Registered User
Thread Starter
yes using that size for revup. yes ATI pulley
Trending Topics
The following users liked this post:
jhc (05-12-2017)
#15
Registered User
Thread Starter
#16
Registered User
Thread Starter