P0300 Random Misfire after engine rebuild
11-15-2017, 05:47 PM
#1
Registered User
Thread Starter
Join Date: Nov 2017
Location: Hawaii
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
P0300 Random Misfire after engine rebuild
My Chevy SIlverado 1500 (2013) just had pistons changed. Immediately after I left the service, the engine light came on. Now the service is telling me there is P0300 error message on and they don't know why..... I am trying to figure out what could have een done wrong during pistons change. Or if they missed any cylinder damage when they were changing pistons....
11-16-2017, 06:41 AM
#2
What the... 
This is a Nissan 350Z forum, not a Chevy Silverado forum. And although we could probably help you fix your problem, it would just be a waste of both our time.. Go here: http://www.silveradosierra.com/
This is a Nissan 350Z forum, not a Chevy Silverado forum. And although we could probably help you fix your problem, it would just be a waste of both our time.. Go here: http://www.silveradosierra.com/
11-17-2017, 06:01 PM
#3
Go to that site he posted above.im a member over there and they have great knowledge for this question.
And your engine is either not getting the proper spark, fuel or air. So look for vacuum leaks, bad or misinstalled injectors, or bad or misinstalled spark plugs and wires.
But again ask this on the Silverado forum. You'll get help MUCH faster.
And your engine is either not getting the proper spark, fuel or air. So look for vacuum leaks, bad or misinstalled injectors, or bad or misinstalled spark plugs and wires.
But again ask this on the Silverado forum. You'll get help MUCH faster.
Thread
Thread Starter
Forum
Replies
Last Post
TrevorM
G35/G37
3
01-04-2018 07:44 AM
Pickle Rick
2003-2009 Nissan 350Z
8
12-19-2017 08:22 AM
