New to the 350zzzz!!!
#1
Registered User
Thread Starter
Join Date: May 2018
Location: North Carolina
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
New to the 350zzzz!!!
Asking $450 for the dual 12" Orion xtp subs and boss 1200watt mono block amp.
The teardown process of my Z
Model number and information
Selling my sony radio for $160
Hi all, i just purchased my 1st Z, and then a week later the 1 or 3 piston started rod knocking and im in the rebuild process. If you have had the same experience and or repair fixes please feel free to add and keep the Z knowledge available for everyone!!
if your in the nc area, with good knowledge of Z's i can use all the Z family help!
Please and thanks in advance!
Z 4 life
Last edited by Rose350z; 05-21-2018 at 06:31 PM. Reason: Adding pictures
#5
Registered User
Thread Starter
Join Date: May 2018
Location: North Carolina
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
But thank God im familiar in the engine removal department thanks to HONDAS..LOL
i just hope this forum is open and more helpful than the others I was on!
#6
Registered User
An RX8 with no issues and a Z that goes *** up in a week, that's a tale that is usually told the other way round lol.
There are a mass of very knowledgeable owners on this site and will do all they can to help. The one proviso is that you make sure you do a little work your end first, use the search facility. You obviously know an open ended spanner from a socket and have ability so you should fit in just fine. I hope the build goes OK.
There are a mass of very knowledgeable owners on this site and will do all they can to help. The one proviso is that you make sure you do a little work your end first, use the search facility. You obviously know an open ended spanner from a socket and have ability so you should fit in just fine. I hope the build goes OK.
Trending Topics
#8
Registered User
Thread Starter
Join Date: May 2018
Location: North Carolina
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered User
Thread Starter
Join Date: May 2018
Location: North Carolina
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I enjoy working on cars in general, and have plenty of patience and as long as theres specifications for what im building i can do all things through Christ Jesus!
but this is my 1st Z and i'm very pleased with the purchase and the overall experience of shape...seating position...handling and how really easy this car is to work on.
i had the engine out in 3-4 hours..and plan on replacing with new Nissan parts for ensuring reliability. Because i drive my project cars hard and like to drift take the twisties and NY-FL runs very often . And to all the Z family thanks for your time and patience plus support with the newborn...
but this is my 1st Z and i'm very pleased with the purchase and the overall experience of shape...seating position...handling and how really easy this car is to work on.
i had the engine out in 3-4 hours..and plan on replacing with new Nissan parts for ensuring reliability. Because i drive my project cars hard and like to drift take the twisties and NY-FL runs very often . And to all the Z family thanks for your time and patience plus support with the newborn...
#10
Registered User
Thread Starter
Join Date: May 2018
Location: North Carolina
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Guess what ????
As i was playing with the vq35de...i rotated the flywheel and kept hearing a noise in the number 5 cylinder and come to find out its the bearing!!! I can easily move the cap with my fingers...lol heres some before and after shots, so please pay attention to the 1st picture and one after it. Theres a tab mark and the bearing is close to the end of it. And the next picture will show the tab almost 3/4 of the rod cap!.
enjoy! Roll that beautiful bean footage!
enjoy! Roll that beautiful bean footage!
#11
Registered User
Thread Starter
Join Date: May 2018
Location: North Carolina
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Since im rebuilding/ overhauling the whole engine
Its time to strip the interior, and sale whats left.
All for sale
All for sale
400 good tires
Has good tires also
2 12" orion xtr subs with 1200watt mono block amp
Its time to strip the interior, and sale whats left.
All for sale
All for sale
400 good tires
Has good tires also
2 12" orion xtr subs with 1200watt mono block amp
#13
Senior Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (13)
Yikes, that's bad. Welcome to the forum and good luck with the rebuild. I'm sure after you're done, it will run better than ever.
As for the items that you're posting for sale, you should start new threads in the classifieds section. Be sure to comply with the forum rules regarding the classifieds. Place a verification slip next to or on top of the item for sale and take the pic before posting the item for sale. We love the Z fam, so we like to make sure people don't get scammed.
Thanks!
As for the items that you're posting for sale, you should start new threads in the classifieds section. Be sure to comply with the forum rules regarding the classifieds. Place a verification slip next to or on top of the item for sale and take the pic before posting the item for sale. We love the Z fam, so we like to make sure people don't get scammed.
Thanks!
The following users liked this post:
travlee (05-29-2018)
Thread
Thread Starter
Forum
Replies
Last Post
ipcheck
Media Share
101
10-23-2006 08:55 AM